What is E40 error?
AEG error E40, E41, E42, E43, E44, or E45 You’ll see one of these error codes or the washing machine will beep or blink a light 4 times. It means there’s a problem with the door lock. The door may not be closed properly. It’s also possible that there’s laundry stuck between the door.
What is E4 error in washing machine?
When the washing machine shows error E4, the washing machine doesn’t get water or too little water to run the program. If it’s open, check the water supply. The inlet hose may be clogged or kinked. If this is the case, remove the kink.
What does E40 mean on a John Lewis washing machine?
display and some acoustic signals sound to. indicate that the machine is not working: • E10: problem with the water supply. • E20: problem with water draining. • E40: door open.
How do I reset my Electrolux ewf14742?
while it’s off, try holding the start/pause button and vapour button and turn knob once to the right. Keep trying this until it resets.
How do you run a diagnostic test on an Electrolux washing machine?
Electrolux Diagnostic Mode * Press the Cancel button to enter standby mode and enable diagnostic entry. * Within 10 seconds after pressing Cancel , press any button to wake up the control. button under the display simultaneously for 3 seconds to enter the diagnostic mode.
What is E3 error in Electrolux washing machine?
Water cannot be drained 1. Drain hose is placed too high.
How do I reset my Electrolux automatic washing machine?
Turn the machine off at the powerpoint, wait for one minute, and then turn it back on. If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds.
What does E40 mean on an Electrolux washer?
Electrolux washing machine E40 error is a generic door not closed error. It is best to enter the diagnostic mode to see the detailed error, it could be E42 – Door lock faulty or E43 – Door lock triac on PCB faulty. This will make diagnosing this problem easier.
What is the error code on an Electrolux washing machine?
This code is a one of the frequent Electrolux washing machine error codes because very often the door is not shut properly. Electrolux washing machine E40 error is a generic door not closed error. It is best to enter the diagnostic mode to see the detailed error, it could be E42 – Door lock faulty or E43 – Door lock triac on PCB faulty.
Why is my washing machine saying error E40?
Error E40 is a common error caused by a breakdown of the door lock device. This error can be clarified if you enter the diagnostic mode of the control board. On washing machines without a software selector, this can be done as follows: Press the two buttons on the right at the same time, indicated by the number 1 in the figure below.
What is the error code for Electrolux APAC?
Error Code E40 | Electrolux – APAC If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.