What size brakes for 3500 lb axle?
Axles rated for 2000-lbs and 2200-lbs typically use 7 x 1-1/4-inch brakes like # AKEBRK-2. These work with wheel diameters up to 13-inches. 3500-lb axles, which are fairly common, use brakes that measure 10 x 2-1/4-inches such as # AKEBRK-35-SA.
Can you add a trailer brake?
If your trailer axle has brake flanges and you plan to add the other brake components separately, you must select hub-and-drum assemblies that are compatible with the trailer spindles. The numbers stamped into your trailer’s existing bearings and seals will help you determine the proper hub-and-drum assemblies.
What size trailer brakes do I need?
To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the # T4071600-500 that you referenced.
What does a 3500 pound axle weigh?
Less than 100 lbs. Probably more like 85 lbs.
How does electric brakes work on a trailer?
Consisting of a battery mounted on the trailer and a cable connecting the trailer to the vehicle, the breakaway system is activated if the trailer breaks free, pulling the cable out of its plug with it. A switch will then trigger the battery and apply the trailer brakes to slow the trailer down.
How much does it cost to install trailer brakes?
Brake Controller Cost Examples (Parts Only)
| Installation Steps | Actions | Cost |
|---|---|---|
| Total Cost for Vehicle-Installed brake | $710 | |
| Elecbrakes | Elecbrakes electric brake controller w/ leader | $699 |
| Elecbrakes | + Installation on trailer by auto electrician | $100 |
| Total Cost for Elecbrakes | $799 |
How big is a Dexter Electric Trailer Brake kit?
Dexter Nev-R-Adjust Electric Trailer Brake Kit – 10″ – Left and Right Hand Assemblies – 3.5K 10″ x 2-1/4″ Driver’s-side and passenger’s-side electric trailer brake assemblies fit 3,500-lb axles. Mounting flanges have a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fit 14″ to 15″ wheels.
How big are disc brakes on a trailer?
Trailer disc brake kit includes 2 assemblies with Dacromet-plated rotors, hub spacers, calipers and mounting brackets. Assemblies fit 3,500-lb axles with 10″ to 13″ wheels. The 8″ rotors feature a 5 on 4-1/2 bolt pattern.
How big are axle brakes on a etrailer?
10″ x 2-1/4″ Driver’s-side and passenger’s-side electric trailer brake assemblies fit 3,500-lb axles. Mounting flanges have a 4-bolt pattern. Built-in levers work with manual parking brake. Fit 14″ to 15″ wheels. Hydraulic Trailer Brake Kit – Uni-Servo – Dacromet – 10″ – Left/Right Hand Assemblies – 3.5K
What kind of brakes do I need for a boat trailer?
Marine-grade, driver’s-side and passenger’s-side hydraulic drum brakes have single plungers. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates are extremely corrosion resistant. Fit 14″ to 15″ wheels. Rust-resistant disc brake kit is great for boat trailers.
https://www.youtube.com/watch?v=YK5h_K-9mCs