What does the Hondata reflash do?

What does the Hondata reflash do?

A reflash reprograms the engine computer for higher performance, or to complement various engine modifications.

Can you tune Hondata reflash?

Now you can benefit from Hondata’s state of the art custom tuning software and calibrations with no downtime. Within a few minutes they can install one of the many tuned base maps. If you want to go a little further the Hondata dealer can perform a custom tune.

What is Hondata KPRO?

K-Pro. The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus Windows software which allows you to re-program the ECU and datalog sensors. Acura RSX/ Honda Integra.

What ECU can you use for KPRO?

As a general statement Type-R ECU’s (PRD & PRC) are good for swaps where you don’t have the money to go K-pro, and Type-S ECU’s (PRB) are goog for when you do go K-pro. First of all Type-R ECU’s can run on any car with one small jumper wire for the fuel pump, and then the car will run, simple as that.

Can Honda see if you tuned your car?

Yeah, they can see it. But they have to PROVE that it was the cause of it. And since the issue is with the transmission, good luck proving a tune caused it.

Does Hondata void warranty?

1. The product Hondata is not a Honda Canada genuine accessory and therefore voids the warranty of any parts related failure due to the use of Hondata remapping of the Engine Control Unit.

Is Hondata legal?

Hondata CARB FlashPro Description. This CARB Compliant / Exempt FlashPro is fully emissions legal in all 50 states for street or race use.

Can a dealer tell if you tuned your car?

Yes, the dealer CAN tell if your car was tuned.

How do I know if my ECU is flashed?

So you could check under the wiper cowl on look on the ECU its self to see if it has been modified. Also, do you have a boost gauge? That would be the big indicator… if its peaking around 20+ psi then yes it has been flashed with a tune.

What do you need to know about Hondata KPRO?

The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus Windows software which allows you to re-program the ECU and datalog sensors.

What’s the boost psi on a Hondata K?

Boost is mapped to 11 psi (0.8 bar) using the stock map sensor and 28 psi with replacement MAP sensors. No additional hardware other than larger injectors is required or recommended to use the boost maps in a K series engine. The K-Pro ECU upgrade is nitrous aware.

What kind of ECU does a Hondata K-PRO have?

This is a Hondata modified 2002-2004 RSX ECU and an adapter harness for the 05-06 RSX Hondata mak.. 2001-2005 D17 Civic DX, LX, HX & EX Manual transmission only (US vehicles only) The K-Pro for.. This is a specially adapted ECU which allows the 2000-2005 S2000 to run from a RSX ECU.

How long does it take to calibrate a Hondata?

Included is a calibration similar to the Hondata # 4 reflash and the K20A (ITR reflash). Each calibration here has taken about 8 hours of dyno. It is still recommended to tune your car on the dyno as the specifications for the cars tuned in the calibrations will not exactly match your car.