How do I manually feed my Xerox printer?

How do I manually feed my Xerox printer?

Load the Manual Feed Slot (Bypass Tray)

1. Press to open the manual feed slot, located on the front of the printer.
2. Load the print material between the width guides with the print side facing up.
3. Adjust the paper guide to the width of the print material.

What is manual feed in printer?

“Manual Feed” is an indication that your machine’s Tray Setting or the paper source in the printer driver has been set to Manual Feed, but there’s no paper loaded in the manual feed slot. 1. Load a sheet of paper in the manual feed slot. The document should print and clear the error message.

Where is bypass tray Fuji Xerox?

Open the Bypass Tray, located on the left side of the printer, by rotating it outward.

What does do not put paper in the manual feed slot error?

Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam. If you put any Media (paper, transparency and so on) in the manual feed slot before the machine is in the Ready state, the media may be ejected without being printed on.

How do I set my printer to manual feed?

Printing using manual feed

1. Make sure that the product is idle and the Ready light is on.
2. Access the product Properties dialog box.
3. Click the Paper/Quality tab.
4. Select Manual Feed from the Source is drop-down list.
5. Load paper or an envelope into the priority feed slot, depending on the print job.

How do I load a bypass tray?

Load Paper in the Bypass Tray

1. Open the Bypass Tray.
2. Pull out the extension tray for larger sizes.
3. Move the width guides to the edges of the tray.
4. Flex the sheets back and forth and fan them, and then align the edges of the stack on a level surface.
5. Load the paper in the tray.

How do I bypass a print?

When you return to your computer:

1. Select File.
2. Select Print.
3. Select Printer Properties.
4. For Paper Source: select Bypass.
5. For Paper Type: leave as plain or select the appropriate type such as Thick 1 for labels, Thick 2 for cardstock, etc.
6. Click OK.
7. Click Print.

How do I print from MP tray brother?

To print from the MP Tray, make sure that you select the “MP Tray” setting within the printer driver. To see how to select the setting, follow these simple steps: Click Start=>Settings=> Printers. Right click on the appropriate Printer Icon and select “Properties”.

How do you fill a Brother printer with paper?

FAQs & Troubleshooting

1. Pull the paper tray completely out of the machine.
2. Press and slide the paper guides to fit the paper.
3. Fan the stack of paper well.
4. Load paper in the paper tray with the printing surface face down.
5. Make sure the paper is below the maximum paper mark ( ).

How do I change my printer from Tray 1 to Tray 2?

Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.