What does Archoil AR9100 do?

What does Archoil AR9100 do?

AR9100 removes and disperses deposits and forms a friction reducing solid boundary lubricating film. By removing deposits and reducing friction, AR9100 eliminates stiction issues.

Does Archoil really work?

IMHO fuel additive is needed and oil additives are not if you use quality oil and change it on time, but Archoil & Rev-X won’t hurt and they do work for stiction and increasing lubricity. So if it makes you feel good or your injectors are acting up, use it.

How often should I use Archoil?

How often should I treat my engine with AR9100? To maintain the products benefits we recommend adding AR9100 to every oil change.

Does stiction Eliminator really work?

We have been testing Hot Shot’s Secret Stiction Eliminator since 2004 and have found it to be 90% effective. Trucks having problems were hooked up to a diagnostic computer and tested. Computer analysis showed anywhere from 1 to 6 injectors needing replacement. The owners noticed more power and a smoother running truck.

How does Archoil 6200 work?

AR6200 incorporates Archoil’s combustion modification technology, leading to a significant reduction in soot and carbon build-up. The product also improves lubricity for fuel system protection and contains a powerful stabilizer and dispersant package for long term fuel storage.

What is injector stiction?

Stiction is the sticky, gummy residue of burnt oil on moving engine parts that causes dragging friction. Stiction can occur on your diesel’s HEUI injectors, o-rings, springs, piston and the turbocharger. The most obvious symptom of stiction is a diagnosis of a failed injector.

How do I use Archoil AR6400 D Max?

USAGE INSTRUCTIONS

1. Add the correct amount of AR6400-D Max to the fuel tank first and then fill up with fuel immediately afterwards.
2. Treatment ratio is 1:100 > 1:200. A single 400ml bottle will treat between 40 and 80 litres of fuel.
3. A 5 litre container will treat up to 1000 litres of fuel.

Does Archoil prevent gelling?

AR6300 Winter Diesel Treatment is a concentrated fuel treatment which is added to every tank of diesel to boost performance, ensure fuel quality, protect your fuel system and protect against gelling in cold weather. AR6300 promotes a more complete combustion which improves efficiency, power and response.

Does Archoil clean injectors?

Rapidly cleans injectors, turbos, DPFs and EGRs to restore and maintain maximum performance and fuel economy.

How long does it take for stiction eliminator to work?

Q: How long does it take for Stiction Eliminator to work? A: While using Stiction Eliminator customers have reported 50 miles and others it takes the entire oil change cycle.

Does seafoam help with stiction?

Whether a gas or diesel engine, the oil treatment instructions are the same at 1 ounce of Sea Foam per quart of engine oil in the crankcase. And yes, adding Sea Foam to diesel oil every interval will help to overcome and manage injector stiction.

What does ar9100 do to a car engine?

Reduced friction means a system will develop less heat and run more smoothly and quietly. AR9100 will gently remove and disperse any sludge, varnish and carbon deposits that have built up in the engine. Continuous use of AR9100 will then keep the engine clean. Use of AR9100 typically extends oil drain intervals.

How big is ar9100 as an oil additive?

AR9100’s extreme pressure additive is a nano material. The average particle size of AR9100 is 100 nanometers which is 1/10 of a micron, so AR9100 will pass through fine oil bypass filters without causing issues. I just bought a brand new vehicle, when should I add AR9100?

Can you add ar9100 oil to a full crankcase?

Yes, if you are adding AR9100 to an already full crankcase make sure there is room to add AR9100 by draining some oil out beforehand. Make sure not to add AR9100 to an already full crankcase, doing so will exceed your engines maximum oil capacity and can cause engine damage.

Can you use ar9100 oil in an automatic transmission?

AR9100 is compatible with both synthetic and conventional engine oil. Can I add AR9100 to automatic transmissions? No, We don’t recommend using AR9100 in automatic transmissions.