How much HP does a supercharger add to a 350 SBC?
| TRICK FLOW SPECIALTIES SUPERCHARGED 350 (7 PSI BOOST) | |
|---|---|
| Torque | Horsepower |
| 2900 | |
| 3000 | 332 |
| 3100 | 343 |
How much horsepower does a supercharged 383 stroker have?
Run naturally aspirated, the 383 produced 550.2 horsepower and 491 lb-ft of torque. After installation of the Weiand 177 and single 950 CFM carburetor, the supercharged combination thumped out 645 horsepower at just 6 psi.
Can you put a supercharger on a 383 stroker motor?
Add a Supercharger to a Well-built 383 and Get a Real Boost in Performance. Today it’s not uncommon to see superchargers finding their way onto just about anything short of a lawnmower. Blower companies offer bolt-on kits for virtually every application, be it an EFI-induced late-model or a carburetor-fed classic.
Can you put a supercharger on a small block Chevy?
Luckily, a Weiand supercharger installation on a small-block Chevy offers everything for everyone. You might be thinking that big power is a simple matter of cranking up the boost on the supercharger, but know that there is (as always) a limit to the available rotor speed and attending boost supplied by any blower.
How much horsepower does a 671 blower add?
So equipped, the 6-71 supplied a peak boost reading of just 4.1 psi, allowing the blown big-block to produce 545 hp and 527 lb-ft of torque. Stepping blower speed up slightly by replacing the crank pulley with a slightly larger 55-tooth version resulted in a jump in boost pressure to 5.5 psi.
What is a 383 stroker Chevy engine?
A 383 stroker has a 0.030 over bore of the stock 350, giving you 4.030 as a bore diameter. Putting the 400 crank in the 350 increases the stroke to 3.750. Other than that, all the other dimensions stay the same. If you do the math, you will get 382.6; round up and you have 383 ci.
What is the stroke of a Chevy 350?
The Chevy 350 is also known as the Chevrolet Small-block engine. It is a series of V8 engines that were used in production by the Chevrolet division of General Motors Company. As its name suggests, this chevy crate engines use a small block V8 with a 4.00-inch bore and 3.48-inch stroke.
What’s the difference between a 350 and a 383 Stroker?
The main difference between 350 engines and 383 stroker crate engines is in the stroke of the cylinders. The length of stroke in a 350 is 3.48, and it uses 350 cubic inches of the engine. After the transformation, the 383 stroker gets a longer stroke, and the engine displacement increases without bringing any change to the block’s size.
What kind of engine does a Chevy ProCharger use?
From 350 small blocks to 383 strokers and all the way up to massive 600+ cid big block monsters, ProCharger’s extensive lineup of applications for carbureted and aftermarket EFI Chevrolet engines are ideally suited for street, strip and full race vehicles.
How much does a Chevy 350 crate engine cost?
We are a premium high-performance custom small block builder and we offer horsepower from 350 up to 500 that is specific for daily driving, not racing. Made in the U.S.A. Turn Key Packages Starting at $5,900.00 Our famous “Hum Baby” Chevy 350 crate engine!