What is IPMItool SDR?

What is IPMItool SDR?

Additionally, the BMC logs any potential health issues into the System Event Log (SEL). You can view the vital signs by using the ipmitool Sensor Data Record (SDR) command. This name is used to reference the sensor in other commands also. The sensor reading in the second column indicates a healthy system.

What is IPMItool used for?

About IPMItool IPMItool enables you to manage system hardware components, monitor system health, and monitor and manage the system environment, independent of the operating system.

How do I get IPMItool?

Download the latest version of IPMItool from the official website:

1. Get the patch tarball “ipmitool-1.8.18.tar.gz”: Unzip the file, configure and build source:
2. Load IPMItool driver:
3. Execute first IPMItool command, to read the current HPM. 1 version configuration.

What port does Ipmitool use?

The remote server TLS TCP connection port is 443 (default). For IPMI v2. 0 and 1.5, the remote server UDP TCP connection is port 623 (default).

Which port does Ipmitool use?

How do I change my BMC password with Ipmitool?

Resolution

1. Connect to the host via SSH and from the menu select Shells, then boot shell.
2. Issue the following command: ipmitool user list.
3. Note the ID of the IPMI admin user.
4. Change the password with the following command: ipmitool user set password.

How do I reset my Ipmitool BMC?

Reset/Reload BMC from Web UI

1. Log in to the IPMI WebUI.
2. Navigate to “Maintenance —> Unit Reset”
3. Click on Reset. It will display a Loading message along with “The device is rebooting itself.
4. It will redirect to Login page after BMC has finished rebooting. If not, the link can be used.

How to use ipmitool in Oracle Solaris server?

For a listing of the present server components, SP event log entries, or SP information about the network interface card (NIC), use the following IPMITool commands that are appropriate for your server operating system. For Linux and the Oracle Solaris OS: # ipmitool -I interfacesdr list

What is the driver for IPMI in Solaris?

IPMI management of a local system interface requires a com- patible IPMI kernel driver to be installed and configured. On Linux this driver is called OpenIPMI and it is included in standard distributions. On Solaris this driver is called BMC and is inclued in Solaris 10.

What is the BMC driver in Solaris 10?

On Solaris this driver is called BMC and is inclued in Solaris 10. Management of a remote station requires the IPMI-over-LAN interface to be enabled and configured. Depending on the particular requirements of each system it may be possible to enable the LAN interface using ipmitool over the system interface.

How is ipmitool used in the host operating system?

The network management (NET MGT) interface enables you to use the host operating system to execute IPMITool commands on the ILOM service processor. Using IPMITool commands, you can perform server initialization, monitoring, and maintenance tasks from the host operating system.