How do you reset the change oil light on a Grand Marquis?

How do you reset the change oil light on a Grand Marquis?

How to reset oil service light Mercury Grand Marquis.

1. Turn the ignition to run, one position before starting engine.
2. Press and hold the RESET control for 2 seconds and release. Oil life is set to 100% and “OIL LIFE XXX% HOLD RESET IF NEW IL” is displayed.
3. Press and hold the RESET control for 3 seconds and release.

How do you reset the oil light on a 2005 Mercury Grand Marquis?

Don’t start the engine! Press and hold the RESET button until “OIL LIFE SET TO 100%” is displayed. It will reset your oil life monitor and turn the change oil soon reading off.

How do I reset my Mercury Oil Change message?

Reset Oil Change Light Ford / Lincoln / Mercury Procedure

1. Press the SETUP button to display PRESS SELECT TO BEGIN SYSTEM CHECK.
2. Press the SELECT button to display OIL LIFE – PRESS RESET IF NEW OIL.
3. Press and hold the RESET button until OIL LIFE SET TO 100% is displayed.

How do you reset the oil life on a 2006 Mercury Mariner?

Reset Mercury Mariner Change Oil Light Procedure:

1. Press the SET button to access the “Sys Chck” menu.
2. Press and release SET button to get to “Oil Chng XXX% hold Set New” menu.
3. Press and hold SET button for 2 seconds or until “Oil Change Set To 100%” is shown in display.
4. Release the button and the oil life is now reset.

How do you reset the change oil light on a 2006 Lincoln Navigator?

Reset oil service light Lincoln Navigator

1. Turn the ignition to run, one position before starting engine.
2. Press and release the SETUP control to display “OIL LIFE = XXX% HOLD RESET = NEW”.
3. Press and hold the RESET control for 2 seconds and release.
4. To change oil life 100% value to another value, proceed to Step 5.

How do you reset the change oil light on a Mercury Mariner?

How to reset oil service light Mercury Mariner.

1. Turn the ignition to run, one position before starting engine.
2. Press the SET control to access the system check function.
3. Press and release the SETUP control to display “OIL LIFE = XXX% HOLD RESET = NEW”.
4. Press and hold the RESET control for two seconds and release.

How do you reset the oil light on a 2005 Lincoln Navigator?

Turn the ignition to run, one position before starting the engine. Press and hold the RESET button again until “OIL LIFE SET TO 100%” is displayed. Turn key off and then start your car and it should be reset.

How do you reset the change oil light on a 2007 Lincoln Navigator?

2007-2013

1. Press and release the SETUP button to display “Oil Life XXX% Hold Reset = New”
2. Press and hold the RESET button for 2 seconds and release to reset oil life to 100%

How to reset Mercury Grand Marquis oil change required light?

Follow the instructions below to reset the Oil Change Required Light on your Mercury Grand Marquis: Don’t start the engine! Press and hold the RESET button until “OIL LIFE SET TO 100%” is displayed. It will reset your oil life monitor and turn the change oil soon reading off.

When to reset the oil change required light?

If the engine oil life is less than 10%, the Oil Change Required Light will appear on the display. The engine oil life interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Oil Change Required Light on your Mercury Grand Marquis: Don’t start the engine!

When did the Mercury Grand Marquis go out of production?

From 1974 to 1982, the most expensive versions of the Mercury Marquis were provided with the name Grand Marquis. The Grand Marquis was the luxury version of the Ford Crown Victoria, whose production has also been closed with closure of the plant in St. Thomas (Canada) on 31 August 2011 now.