What is garage floor coating called?
Epoxy floor coatings are usually two part solids based, solvent based or water based. Epoxy flooring consists of a Resin part and a Hardener part, much like epoxy glue. Regular garage floor paints are one part oil based or water based.
Is polyaspartic the same as polyurethane?
Relatively new on the industrial coatings scene is polyaspartic technology, a hybrid coating similar to polyurethanes. They perform well as structural protection, are more versatile in terms of protecting assets in harsh weather conditions and offer better impact resistance than epoxy and urethane coatings.
What are polyaspartic coatings?
Polyaspartic is a hybrid material that resembles polyurethane. It was first developed in the ’90s as a coating for steel in bridges and used for its corrosion-resistant properties. This alternative to epoxy is also known as an aliphatic polyurea sealer, which is a mix of ester and other materials.
What is a polyaspartic top coat?
5097 Polyaspartic is a fast drying ultra high solids Polyaspartic topcoat flooring product designed for use over concrete floor coatings and a wide range of other decorative concrete floor coatings and concrete floor stains. For professional use only by installers experienced with fast drying polyaspartics.
How long does a polyaspartic floor last?
A correctly installed garage epoxy floor with proper maintenance should last more than 10 years.
Is polyaspartic an epoxy?
Polyaspartic is a coating and sealing product in the same category as epoxy and polyurethane. However, the majority of polyaspartics are not 100% solids but are solvent-based.
Can polyaspartic be applied over epoxy?
Can Polyaspartic Coatings be used over an Epoxy Coating? Yes, Polyaspartic coatings exhibit superior inter-coat adhesion with epoxy coatings. For old epoxy floor coatings that are still well adhered to the substrate, an installer can apply a new polyaspartic top-coat over that area.
When did flexmar come out with polyaspartic flooring?
The original company to introduce polyaspartics to the concrete garage floor and commercial markets. FLEXMAR came onto a patented material that made it possible to successfully do a coating in one day. This was introduced at the 2006 World of Concrete and FLEXMAR has been involved with thousands of floors since then.
What kind of material is polyaspartic flooring made of?
To begin with, a polyaspartic is a type of polyurea (actually a polyaspartic aliphatic polyurea). Polyurea as a commercially viable material was developed in the 1980s by Texaco Chemical Company (now Huntsman Chemical).
How big can polyaspartic floor coatings be diluted?
Polyaspartics can be diluted or applied to thicknesses of less than 6 mils, which make most of them permeable and breathable. With the breathability issue resolved, you now have the option of using this extremely durable coating for exterior stamped and stained work.
What are the pros and cons of polyaspartic flooring?
Cons of Polyaspartic Garage Flooring 1 Expensive: The benefits of polyaspartic coating come at a higher cost. 2 Weakness to battery acid: Mechanics beware. 3 Tricky application: DIY application is difficult since you have to evenly spread the coating with a squeegee or roller.