What does a track bar do on a Jeep Wrangler?
Track bars are designed to prevent unwanted lateral movement of your vehicle’s axle assemblies. So, if you had no track bar on your Jeep, then you would feel the body float severely left or right over the axles when turning which, most likely, would lead to catastrophe due to the physics of energy and momentum.
What does adjusting track bar do?
The track bar is located underneath the rear of the car. By raising or lowering the right side of the bar, a driver can alter the position of the rear axle in relation to the car’s centerline. Any changes affect the weight distribution of the car and how it moves through the corners on the track.
Does a track bar affect alignment?
the track bar doesn’t effect camber, caster or toe, but track bar length will effect steer ahead.
Why you need an adjustable track bar?
And an adjustable track bar allows you to correctly position the axle after making any suspension height changes. If you run 6” lift coil springs and decide to change over to 8” lift springs, then an adjustable track bar will allow you to easily correct the axle position and retain proper vehicle drivability.
Where is the track bar on a Jeep Wrangler?
Jeep Wrangler Track Bar kits. The factory Track bars locate the body in relation to the axle. It is located at the framerails and runs down to the axles. When a jeep is lifted, the axles shift sideways.
What is a track bar on a jeep?
Jeep Track Bar Install A track bar (also called panhard bar) is designed to keep the axle of your Jeep centered under your vehicle, so that you don’t have more sticking out the drive’s side than you do the passenger’s.
What is JK track bar?
A track bar is essential to keeping your Wrangler’s rear axle centered under your Jeep Wrangler. It also provides support, reducing lateral movement from side to side, a feature helpful for those who wheel as well as for those who simply go off-road once in a while. A Wrangler JK track bar is one of those upgrades that is simply going…