What are the components of a lathe?
A lathe machine is a machine tool that mainly uses a turning tool to turn a rotating workpiece. Drill, reamer, tap, die tools can also be used on the lathe for corresponding processing. The main components are: Headstock assembly, Toolpost, Tailstock, Lead screw, Feed rod, Bed, Leg and cooling device.
What are the 6 major components of the lathe?
There are six major parts of a lathe machine. These are the bed, the head stock assembly, the main spindle, the tail stock, the carriage, and overload safety devices.
What are tool bits?
: cutting material of square cross section a few inches long that is shaped to perform a machining operation when clamped on a tool shank or holder.
What is compound rest?
A compound rest is a device found on a lathe tool. The tools used to shape and polish objects on a lathe are located on a movable carriage that sits above the spindle. Many lathes feature programmable settings that automatically adjust the carriage to make precise cuts into the wood or metal.
Is known as Universal chuck?
Detailed Solution. Explanation: Three Jaw Chuck: It is also known as three jaws universal chuck, self-centering chuck, and concentric chuck having three jaws that work at the same time.
What are the different parts of a lathe machine?
What are the Different Parts of a Lathe Machine? 1 Bed. Just about every lathe machine relies on a bed. A bed is a long structure that, for most lathe machines, looks a lot like a beam. All of the 2 Headstock. 3 Tailstock. 4 Carriage. 5 Cross Slide.
Where is the headstock on a lathe machine?
Right at the front of every lathe machine bed is the headstock. Every headstock is clamped onto the bed of the lathe machine, so that it does not move when pushed or bumped. The main purpose of the headstock is to support the lathe machine’s rotating element.
Where are the bearings on a lathe machine?
These bearings. The tailstock is, in contrast to the headstock, located at the back of a lathe machine. Every tailstock contains a large barrel that cannot be turned or rotated. You cannot use this barrel to rotate a work piece or a tool bit.
How is facing done in a lathe machine?
It can be done by giving feed from tail stock to head stock and by giving depth of cut. The process which is used to reduce the length of a work piece is called FACING. It also used to give finishing along the face. It is done by giving feed from forward to backward (cross slide movement).