How do you calculate current in Delta Connection?

How do you calculate current in Delta Connection?

Transformer Delta and Delta Connections In a delta connected ( Dd ) group of transformers, the line voltage, VL is equal to the supply voltage, VL = VS. But the current in each phase winding is given as: 1/√3 × IL of the line current, where IL is the line current.

How do you calculate Delta transformer?

You can calculate the phase current of a delta transformer winding by dividing the phase VA by the phase volts: IPhase = VAPhase÷EPhase. The phase load in VA of a 3-phase, 240V load is the line load divided by three (one third of load on each winding).

Can you connect a wye transformer to a delta system?

Delta–Wye. The delta–wye connection is the most commonly used three-phase transformer connection. The wye-connected secondary allows single-phase load to be distributed among the three phases to neutral instead of being placed all on one winding as with a four-wire delta secondary.

What is a Wye Wye transformer?

Wye-Wye: A Wye-wye connection is suitable for transformer applications that do not need a neutral on the primary side. The three-wire configuration can be used on three-phase and single-phase circuits. In the event one of the transformers fails prematurely or gets damaged, the entire system could become compromised.

How do you calculate phase current?

Phase current I(P) in Amps is equal to line current I(L) in Amps divided by root 3. Example: Calculate the phase current of the delta connected alternator output line current of 1500 Amps. I(P) = 1500 / 1.732 = 866 Amps.

What is the ratio of Wye to delta voltage?

In a typical delta/wye, the ratio is 4:1. If the primary phase voltage = 480V, the secondary phase voltage = 120V. Delta and wye also differ in regard to their phase voltage vs. line voltage and phase current vs. line current

What is the phase voltage of a wye transformer?

Phase Voltage: The internal transformer voltage generated across any one winding of a transformer. For a delta secondary, the phase voltage equals the line voltage. In a wye system, the phase voltage is less than the line voltage by the Square Root of 3 (Figure 12–3, A2 and C2).

What makes a non standard wye delta transformer non standard?

In a standard delta–wye (or wye–delta) transformer, the positive-sequence currents and voltages on the high voltage side lead the positive-sequence currents and voltages on the low voltage side by 30°. When the high voltage phasors lag the low voltage phasors, the connection is considered to be non-standard.

How is the phase voltage of a delta transformer calculated?

For a delta secondary, the phase voltage equals the line voltage. In a wye system, the phase voltage is less than the line voltage by the Square Root of 3 (Figure 12–3, A2 and C2). Ratio: The number of primary winding turns divided by the number of secondary winding turns.