How configure PLDT FIBR modem?

How configure PLDT FIBR modem?

Enabling the Admin Account Needed to Configure a PLDT Router

1. Open your internet browser.
2. Type in or copy and paste the Username and Password as shown above, f~i!
3. Under the Device Management menu, click the “Debug Switch”.
4. Enable the “Web Admin Switch” by clicking the radio button labelled “Enable”.

How can I access my PLDT Wi-Fi modem?

Open your internet browser and put http://192.168.1.1 and use admin as your default username and 1234 for password. Once you have opened the Wi-Fi modem User Interface, log in using the default username and password which can be found at the back or under the modem.

Why is my PLDT Wi-Fi not working?

Make sure that you are up to date with your account and you have no outstanding balance. Turn your modem ON and check if the POWER light indicator is steady green. If not, make sure that the modem is properly plugged in and check if there are any loose or damaged cables.

What should I do if my PLDT modem is not working?

Power indicator is not lit Check if the modem is properly plugged in and if the power button is pressed in. Ensure that the power cord is connected to the modem. Plug the modem into another power outlet. Turn the modem off and back on after 5 minutes then check the powerlight status.

How do I troubleshoot my wireless modem?

Troubleshooting routers and modems

1. Test your Wi-Fi on different devices.
2. Restart your modem and router.
3. Try a different Ethernet cable.
4. See who’s using your Wi-Fi.
5. Upgrade your equipment.
6. Call your internet service provider.
7. Reset your router to default settings.

How do I reset my PLDT Wifi modem?

To reset the PLDT router to its defaults, press the reset switch at the back of the router for about 10 seconds. Use a small pointed tool like a paper clip to depress the reset switch is accessible via a small hole at the back of the router. Wait for the router’s lights to turn off before releasing the switch.