How do I save my minicom output?

How do I save my minicom output?

Select ‘Filenames and paths’ and press ‘F’ (Logging options). By default this will be saved as ‘minicom. log’, but change it to whatever you like with the ‘A’ key. Press ‘Enter’ to save the changes.

Where does minicom save configuration?

location of configuration files The configuration files for minicom are located in /etc, with a name prefix of ‘minirc. ‘. You can have several minicom configuration files, for different serial hardware on your machine.

How do I turn off minicom console?

2 Answers

1. prepare the file escape.txt using vi in order to write ^Ax^M.
2. launch minicom script.

How do I change minicom settings?

Configure Minicom

1. Change the line speed (press E) & change to “9600”
2. Change the hardware flow control (press F) & change to “No”
3. Change the serial device (press A) & change to “/dev/ttyS0”
4. Or to use your USB port, change the serial device to “/dev/ttyUSB0”

How do I set up minicom?

Configure minicom for a USB-to-Serial Converter

1. Type sudo minicom -s.
2. Press the down arrow twice.
3. Press Enter.
4. Press A, and set the serial device to /dev/ttyUSB0 and press Enter.
5. Press E and set the Bps/Par/Bits to 115200 8N1 and press Enter.
6. Press F until Hardware Flow Control in No.
7. Press G until Software Flow Control is No.

Why does Minicom say offline?

Minicom is saying you are offline because the DCD “Carrier Detect” line is low. If you were using a MODEM, this line would be high while the MODEM was connected to the phone line.

Why do I need MiniCom to capture output?

Because you have set minicom to capture output, by tailing the log/capture file you can scroll back as far as you need should you be running things with lengthy output, It can be useful for configuration files in routers/switches for example which can be thousands of lines long.

How do I create a Minicom configuration file?

Create the minicom configuration file using nano. Adapt the capitalised parts to fit your needs, baudrate may be set incorrectly if you get quirky characters or no output. You may create as many as you need along with the desktop shortcuts. just change the identifier. Create a desktop shortcut.

Where is Minicom configuration file stored in Sudo?

minicom needs a configuration file that is under root permissions and is stored at /etc/minicom/ and is named minirc.dfl. Usually when you first run minicom for the first time, as sudo, you can save the minirc.dfl, as if you run as any other user it will not save. That may be your problem.