How do I reset the code on my VE Commodore?

How do I reset the code on my VE Commodore?

1. Disconnect the positive terminal of the battery for 10 to 20 mins and then reconnect the battery, this should clear the code, but it could come back.
2. Find a mate who has a scan tool who can clear the code for you, however, it could come back again.

How do I reset my malfunction indicator light?

How do I reset my malfunction indicator light? Another simple approach to get rid of the check engine light is to turn on and off the car three times. Insert the key in the ignition, turn the car on for a second, and turn it off for another second. Repeat this process three times.

How do you reset the oil light on a VE Commodore?

Resetting Engine Oil Life

1. Enter Engineering Mode. To do this, follow our guide on Accessing Engineering Mode.
2. Navigate to ‘Engine Oil Life’.
3. To reset this value to 100%, simply depress the accelerator pedal to the floor three times at a steady pace.
4. After a few seconds the value should reset to 100%.

How to reset your VW service light by model year?

How to Reset Your VW Service Light by Model Year 2006-2015: Turn your key into the on position 2000-2005: Turn ignition to off position 1993-1999: Turn the key into the on position 1990-1992: Your Volkswagen service button must be reset with a scanner at your local Volkswagen dealership or service center.

How to reset Holden Commodore VZ service engine oil light?

Follow the instructions below to reset the Service Engine Oil Minder Light on your Holden Commodore VZ: Don’t start the engine! Keep hold the buttons until you see SERVICE RESET? Release the button when “Service Reset?” appears on the display. Press the button until you hear the beep.

How do I reset the service reminder on my VE Commodore?

Hold down the ‘Trip’ button and turn the ignition on. You should see the following message on the screen asking to reset the service reminder. Release the ‘Trip’ button. Hold down the ‘Enter’ button for 3-5 seconds until you hear a chime and the message disappears.

How do you reset service light on Holden Monaro?

Release the button when “Service Reset?” appears on the display. Press the button until you hear the beep. Turn the ignition off and then start the engine to verify the indicator has been reset. Done! These instructions are based on the Holden owner’s manual.