What is Juniper MPC?
Modular Port Concentrators (MPCs) provide packet forwarding services. A specialized fixed configuration MPC provides higher port density over MICs and combines packet forwarding and Ethernet interfaces onto a single line card.
What is MS interface in juniper?
ms —Multiservices interfaces on multiservices modular interfaces card (MS-MIC) and multiservices modular port concentrators (MS-MPC). mt —Multicast tunnel interface. This interface is automatically generated, but you can configure properties on it if needed.
What is MS mic Juniper?
The Multiservices Modular Interfaces Card (MS-MIC) provides improved scaling and high performance for MX series routers. The MS-MIC has enhanced memory (16 GB) and enhanced processing capabilities. See Junos OS Services Interfaces Library for Routing Devices for more information.
What is FPC SRX?
Flexible PIC Concentrators (FPCs) and Physical Interface Cards (PICs) function similarly to MICs and MPCs. PICs provide physical interfaces for the router and install into FPCs which provide packet forwarding services. Each FPC supports up to two Physical Interface Cards (PICs). MX960 router—6 FPCs.
What is DPC in Juniper?
A Dense Port Concentrator (DPC) provides multiple physical interfaces and Packet Forwarding Engines (PFEs) on a single board that installs into a slot within the MX240, MX480, and MX960 routers. The DPCs are optimized for Ethernet density and can support up to 40 Gigabit Ethernet or four 10-Gigabit Ethernet ports.
What is FPC and PIC Juniper?
Flexible PIC Concentrators (FPCs) and Physical Interface Cards (PICs) function similarly to MICs and MPCs. PICs provide physical interfaces for the router and install into FPCs which provide packet forwarding services. Each FPC supports up to two Physical Interface Cards (PICs).
What is SPC SRX?
Services Processing Cards (SPCs) provide the processing power to run integrated services such as firewall, IPsec and IDP (see Figure 1 on page 2). All traffic traversing the services gateway is passed to an SPC to have services processing applied to it.
What is modular port concentrator?
Modular Port Concentrators (MPCs) provide packet forwarding services. The MPCs are inserted into a slot in a router. A specialized fixed configuration MPC provides higher port density over MICs and combines packet forwarding and Ethernet interfaces onto a single line card.
What is SPC Juniper?
This document describes how to remove and replace a Services Processing Card (SPC) on Juniper Networks SRX 5800 and SRX 5600 services gateways.
What is an MPC port?
What is an MPC card?
Makeplayingcards or MPC as it’s frequently referred to, offer a service to print high quality playing cards based on your own images. You can either use the google drives linked in the sticky post or design your own cards.
Where can I get a MCP card?
The MCP card should be made available at all points in health system. MCP Card should be issued to every pregnant woman who registers her pregnancy with the ANM/Medical officer during the first Antenatal Care (ANC) visit.
What’s the difference between a DPC and a FPC?
What I read in the MX960 hardware guide is that: fpc—Slot in which the DPC is installed. adwivedi10-01-2016 04:58 FPC is Flexible PIC Concentrator houses one or multiple PICs (Physical Interface Cards).DPC a…
Can a MS-MPC and MS-DPCs co-exist?
Both MS-MPCs and MS-DPCs can co-exist in the same chassis. Active flow monitoring and export of flow monitoring version 9 records based on RFC 3954 Stateful firewall with packet inspection—detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks Support for MTUs up to 9192 bytes.
Can a MPC be used on a MX router?
For information on which MPCs are supported on MX Series routers, see MPCs Supported by MX Series Routers. One Junos Trio chipset for increased scaling for bandwidth, subscribers, and services. Enhanced memory with 128 GB of memory (32 GB per NPU) and processing capabilities. NPU CPU Clock Cycle of 1.2GHz. Four NPUs per MPC.