What is the easiest Fiero engine swap?
The easiest engine swap is to put in another 4 cylinder Fiero engine. Next would be a 2.8 V6 Fiero motor. Then a 3.1L V6 and finally a 3.4L V6. All of those engines basically bolt up and use the stock wiring.
Can you engine swap a Fiero?
The 3.4 Liter 60 degree pushrod engine is one of the most logical choices for replacing the old, worn out, 2.8 Fiero engine. This engine is available as a like-new, factory rebuild or factory crate engine. This engine will bolt up directly to the Fiero transmission.
How much did a 1984 Pontiac Fiero cost new?
– History: Pontiac’s Fiero debuted in 1984 with a rear-mounted General Motors 2.5-liter four-cylinder engine and either a four-speed manual or a three-speed automatic. With a starting price of $7,679, the Fiero entered this world designed to be more of an inexpensive commuter than a sports coupe.
How much horsepower does a 1986 Pontiac Fiero have?
Power
| Inline 4 | |
|---|---|
| Power : | 92 HP (67.712 KW) @ 4400 RPM |
| Torque : | 132 Ft-Lbs (179 NM) @ 2800 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.0 in | 76 mm. |
How much does a Pontiac Fiero weigh?
| Pontiac Fiero | |
|---|---|
| Width | 1984–1986: 1,750 mm (68.9 in) 1987–1988: 1,753 mm (69.0 in) |
| Height | 1,191 mm (46.9 in) |
| Curb weight | 1,116 to 1,265 kg (2,460 to 2,789 lb) |
| Chronology |
How much is a Pontiac Fiero worth?
A: The average price of a Pontiac Fiero is $11,072.
How much is an 84 Fiero worth?
Data based on 40 auction sales. note: The images shown are representations of the 1984 Pontiac Fiero and not necessarily vehicles that have been bought or sold at auction….Pontiac Models.
| Bodystyles | Median Sale |
|---|---|
| Coupe | $8,000 |
| SE Coupe | $1,210 |
| Sport Coupe | $60,500 |
What engine came in a Fiero?
| Pontiac Fiero | |
|---|---|
| Engine | 2.5 L (151 cu in) LR8 I4 2.8 L (173 cu in) L44 V6 |
| Transmission | 3-speed THM-125 automatic 4-speed Muncie manual 5-speed Getrag 282 manual 5-speed Isuzu manual |
| Dimensions | |
| Wheelbase | 2,373 mm (93.4 in) |
Can a stock Fiero engine be replaced with a 3800?
Replacement of the stock Fiero Engine with a 3800 Supercharged Engine is one of the highest levels of engine upgrade that you can perform to your Fiero. This is one of the easier engine conversions, as there are many pre-made components that allow the installation of this supercharged engine into the Fiero.
What kind of speed sensor does a Fiero 3800 use?
The PCM 4000ppm output from the PCM will feed the Fiero’s stock speedo but you will need to build an interface to make it work like the one pictured below: Of course, nowadays I can reprogram nearly all of the 3800 computers to work with any speed sensor you have.
What kind of engine is in a Fiero?
The 3.4 Dual Twin Cam V-6 is a very high performance, high-rev 60 degree engine. This engine has weight-saving aluminum heads. This engine is a very logical replacement for the factory Fiero engine. It will bolt directly to the 4-speed and 5-speed transmissions.
Can a Fiero 125 be used as an automatic?
Using the Fiero 125 automatic is not recommended as the 125 is not capable of supporting the additional horsepower and torque of the 3800 engine. This is one of the highest output conversions for your fiero. It is also one of the most difficult conversions to install.