How does a davco filter work?
Large contaminants and “free” water are separated from the fuel and remain in the body. Fuel rises into the clear cover. Contaminants and emulsified water are captured by the filter media. Fuel level continues to rise to maintain a fuel path through the clean filter media with low restriction.
What is a davco filter?
DAVCO is the North American leader in fuel-heater/water separators and filter systems for diesel powered engines. Advanced filtration technology removes water and contaminants that can result in costly engine repairs and expensive downtime are available for every diesel engine application.
When should I change my davco filter?
WHEN A DAVCO FUEL PRO 482 IS INSTALLED ON THE DETROIT DIESEL DD15 FAMILY OF ENGINES, THE ENGINE FUEL MODULE FILTERS ONLY NEED TO BE REPLACED AT 150K MILE INTERVALS.
What engines use davco Shop Pro?
The Shop Pro FXP 95 is designed for the DD13, 15, 16 engines and the Shop Pro MX is designed for the Paccar MX-11 EPA 2013 and MX-13 EPA 2010/2013 engines. The Shop Pro eliminates the need to use a hand pump or maintain reserve fuel for priming in a separate tank, according to Davco.
What is a fuel pro?
The Fuel Pro 382 is a full-function combination of diesel fuel filtration and water separation that will save you time, money and unnecessary down-time. The Fuel Pro 382 is recommended for heavy duty diesel engines with flow rates up to 180 gallons/hour. WIF and electric heaters can be ordered with Fuel Pro 382 models.
How many gallons of oil does a Detroit 60 series take?
usually going to be 8-10 gallons. Remove drain plug and drain the oil. Replace drain plug.
What is davco Shop Pro?
The Shop Pro is a multipurpose shop floor tool, custom designed to remove water and contaminants from a diesel fuel tank, transfer diesel fuel and prime heavy duty diesel engines including the Detroit Diesel DD13/DD15/DD16 engine line.
How big is a DavCo fuel pro 382 filter?
Filter Cartridge diameter is 3.82″ These filters require the old standard size cover and collar. If you need to replace the cover or collar, upgrade to the plus-sized cover service kit (P/N 103100DAV). Fuel Pro ® 380-382 Documents (Download these printable forms in pdf format.)
How do you tighten the collar on a DavCo fuel pro?
Tightening the collar with the wrench: Simultaneously apply downward pressure to the top of the clear cover until it is seated on the body of the Fuel Pro and hand tighten the collar until it no longer spins freely. Torque the cover assembly by rotating the collar clockwise three additional ribs using the collar wrench.
What kind of wrench do I need for DavCo?
Links will take you directly to the service part on the DAVCO Web Store. DAVCO recommends using only EleMax filters. Heavy Duty wrench (3/8″ thick. Use with a 3/8″ socket wrench drive.)