How do I update my CCBoot server?

How do I update my CCBoot server?

CCBoot Client Upgrade Steps

1. Enable super client for a PC (such as PC101).
2. Diskless boot PC101.
3. On PC101, install the latest version of CCBoot client program.
4. Now, click “Next” until the installation starts.

How do I setup a diskless workstation in Windows 10?

Hardware setup:

1. Connect client PC to server PC via their NICs.
2. Options for client PC IP address assignment. A. Connect client PC to home wireless/wired router – use router DHCP server. B. Configure DHCP server on Windows Server 2012 R2 to assign IP address to client. C.
3. Enable PXE boot option in client PC BIOS setup.

How do I make CCBoot client boot faster?

Improve the Win7 Boot Speed

1. Download win7-boot-speed.zip. http://www.ccboot.com/download/win7-boot-speed.zip.
2. Boot the client with super client.
3. Extract the zip file and run the reg file on the client.
4. Shutdown the client and disable super client.

How do I optimize images for CCBoot?

How to optimize system image

1. Click “start” right click my computer properties device manager/advance see below.
2. Advance click “setting” follow the box and arrow as shown in the image click “apply” button (Figure 2)

What are the system requirements for ccboot server?

Wiki Home System Requirements Server OS System Requirements CCBoot server can be run on Windows 7, Windows Server 2008 R2, Windows 8, Windows 8.1, Windows 10, Windows Server 2012 and Windows Server 2016 Build 1607. It can even be run on Linux (not fully tested). 1.

How does PXE boot server work with ccboot?

It responds requests from diskless stations over network, allocates IP addresses via DHCP for them, pushes necessary data to these stations so that they can boot on LAN even without a harddisk. CCBoot supports install windows 7 via pxe boot. How to configure windows pxe server?

Which is iSCSI bootserver built by ccboot for?

In a word, the iSCSI bootserver built by CCBoot is combination with DHCP and TFTP server. After you have set the client firstly boot from network in BIOS, it will get an IP address from the DHCP.

How to upload an image to a ccboot server?

Input the image file name as you want in the “Image File Name”. Press the “Upload Image” button to upload the image to the CCBoot server. Then CCBoot will create an image in the server “Image Save Path”. Note: CCBoot supports two types image file format. It supports VMDK if you are using Windows 2003 as CCBoot server system.