How do I connect my HDMI to my Onkyo receiver?

How do I connect my HDMI to my Onkyo receiver?

Just use the HDMI 1 port on the back of your TV. Connect the other end of the cable to your receiver. You’re looking for something labeled HDMI Out; it’s usually a different color. If necessary, connect a digital optical cable to the back of your TV (optical out), and the other end to your receiver (optical in).

What is Zone 2 on Onkyo receiver?

The Zone 2 feature on a home theater receiver sends a second source signal to the speakers or a separate audio system in another room. Unlike an A/B speaker setup, Zone 2 provides control of the same or a separate source from the one you’re listening to in the main room.

Should HDMI CEC be on or off?

Requirement: Turn HDMI-CEC OFF on both (a) TV and (b) all source devices. Tips: Using HDMI-CEC OFF, allows you to manually control your TV, Sound bar and connected devices using its’ respective remotes.

How do you turn on CEC on Onkyo receiver?

Set the HDMI CEC (RIHD) setting of the unit to “On”. Press RECEIVER and then SETUP on the remote controller, select “Setup” – “6. Hardware” – “HDMI” – “HDMI CEC (RIHD)” and set to “Yes”. It is also necessary to make the HDMI linked system settings on the CEC-compliant equipment.

How do I connect HDMI to AV receiver?

Option 1: HDMI connection using the ARC feature

1. Connect an HDMI cable to the HDMI ports labeled ARC or the port identified in your manual that supports ARC.
2. On your TV menu, set Speakers to Audio system.
3. Turn on the Control for HDMI setting on your TV, and the A/V receiver or home theater system.

What is HDMI through Onkyo?

A: It’s an HDMI pass-through, so you just plug in all your gear to the receiver and one HDMI cable to your tv. Then it’s just a matter of selecting the right input with the remote or the buttons on the front of the unit. The audio will output from the receiver and pass the video to your tv.

How do I connect my arc to HDMI AMP?

Follow these steps to use the ARC feature .

1. Connect one end of a high quality high-speed HDMI cable to the TV Out ARC connection of the receiver.
2. Connect other end of the HDMI cable to the HDMI ARC input on the TV.
3. Set the HDMI Control setting on the receiver to ON.
4. Set the Control for HDMI setting on the TV to ON.

Can I use Zone 2 as pre out?

You can use the Zone 2 output to feed the tube amp! Your remote has Zone 2 control. This would be a good way to set up a 2ch playback and also have the surround sound setup in the same room.

What can I do with an Onkyo a / V receiver?

Onkyo A/V receivers offer integrated system control with certain HDMI-compatible high-definition displays, DVD and hard-disk recorders, and Blu-ray Disc players. With one remote control, you can control functions such as Standby, Volume, and Direct Change.

What do HDMI inputs do on Onkyo tx-sr508?

The TX-SR508’s four HDMI inputs let you simultaneously connect high-def sources such as a Blu-ray player, a gaming console, and a cable/satellite tuner.

Where does HDMI cable go on Onkyo TV?

The two output HDMI cables past the splitter go either to the Onkyo receiver or directly to the 3D-HDTV. Of course another HDMI cable goes from the receiver to a different HDMI input on the TV. One can select the HDMI input on the TV.

What can an Onkyo WRAT receiver do for You?

The instantaneous current capability of Onkyo’s WRAT receivers exceeds that of most conventional units, which commonly have less than half the current capability. An Onkyo receiver will deliver movie soundtracks with cinema-standard dynamics and clarity.