How do I know what Hilux Diff I have?

How do I know what Hilux Diff I have?

In each case one of the plates will have the ‘Axle’ code originally fitted to the vehicle. As an example a RN25 Hilux manufactured during the 2/74 has the ‘Axle’ code “G142”. The letter “G” signifies it has a “G” series differential and therefore an 8″ diametre crownwheel.

Are all Hilux diffs the same?

Re: Hilux front Diff same as the rear If it’s got a solid front axle, then yup, they are the same. If it’s got the independent front suspension, then they run a different, smaller front diff.

How do you find the diff ratio?

Turn the wheel TWO revolutions and count the number of driveshaft turns. The number of driveshaft rotations will help you determine your rear axle ratio. For example, if it turned 3 and a half times, it’s a 3.50:1 ratio. If it turned 4 and a quarter times, it’s a 4.25:1 ratio.

Does VIN number tell gear ratio?

Identify the VDS section, the fourth through eighth digits of the VIN. This section typically includes information such as the vehicle model, engine size and body type. While not every vehicle manufacturer includes gearbox ratio information in the VDS, this will be where the information is found if it was included.

How do I know my rear gear ratio?

Count the number of teeth on the pinion gear and count the number of teeth on the ring gear. Divide the ring gear teeth number by the number of teeth on the pinion. The result is your gear ratio.

What is a N70 HiLux?

The N70 HiLux engine – the 3.0 D4D 1KD-FTV – is a solid performer. Its power and torque were good for the time but are now way off the pace, which makes tuning upgrades worthwhile. Boost settings and fuelling on the D4D is conservative from the factory, so expect this sort of gain without sacrificing reliability.

Is HiLux automatic or manual?

While many new auto options on the market allow you to pick your engine, the Toyota Hilux does not. You get a 2.8-litre, four-cylinder, and turbo-diesel engine and can choose a six-speed manual transmission in the 4×4 Double-Cab. The rest of the trim levels utilize a six-speed automatic transmission.

Does VIN number tell axle ratio?

Contact the dealer or the manufacturer (you could get a customer service number from the owners manual of the truck) and give them the VIN number and tell them you wish to know the axle ratio. They may only need certain digits from the VIN to determine, but it’s better to have them all in case.

How can I tell what gear ratio I have without pulling cover?

So an easy way to determine your actual gear ratio is to check the tag attached to the differential cover by the cover bolts. On the tag there should be some numbering such as 3.54 or 3.73, either of those numbers will give you the stock axle ratio.

What kind of differential does a Toyota Hilux have?

The Toyota Hilux and Hiace differentials are all similar in design. They feature an 8″ crownwheel, 31 spline axles and large bearings. They have ample capacity for an Escort and a converted Hilux diff will weigh about 60kg. Common ratios to be found at wreckers in Australia are from 4.110:1 to 4.875:1. The taller ratio of

Are there any limited slip diffs for Hilux?

Our Toyota Hilux limited slip rear diffs are reconditioned to meet and exceed Toyota specifications. Rebuilt using only Japanese bearings and seals, with genuine Toyota and quality aftermarket parts.

What’s the best gearing for a Hilux T?

1. An Atlas Tcase with 3.8:1 gearing from Marks Adapters 2. An Atlas/Kluane Combo 3. A Lefty with 4.7:1 crawler gears 4. A Lefty with a 2.28:1 Crawl box in front of it 5. A Crawl box with 2.28:1 gear in front of the stock Hilux T/Case 6. A Crawl Box with 4.7 Crawler gears in front of the stock T/case and run the risk of blown output shafts

How big are the tyres on a Toyota Hilux?

Many thanks to Max for digging up all of this technical info for the 2005-2015 Toyota Hilux, we have collated all of the information we can about the Hilux drive train. The standard tyre sizes on the Hilux vary about 0.2″ between the SR and the SR5 but for all intents and purposes, let’s call them 29 inches in diameter.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top