Are 75mm longboard wheels good?
The 75mm wheel rides over cracks, sticks and rough roads with ease. The sharp square lip grips the road hard while sliding smooth and buttery. The core is encapsulated, which supports the lips for traction and crisp slides. The Orangatang In Heat is the best longboard wheels for downhill riding.
Can you use 60mm wheels on a longboard?
The answer is yes. A normal skateboard has a wheel diameter of 48-60mm and longboard, 63-75mm. Durometer is a measure of hardness. A wheel with a lower durometer will grip better and with a high durometer, the tendency would be to slide.
What size wheel is good for cruising?
Best Skateboard Wheels For Street Riding Anything above 53 mm is ideal for cruising or riding faster. Choosing a harder wheel is a good option if you plan on doing tricks.
What type of wheels are best for longboards?
For longboard applications, where you are on rough roads a lot of the time, a softer wheel (75a) will be grippier, with a “grabby” slide, and a harder wheel (85a) will be slidier but also can be hard to control and bring back into grip. Around the middle (78-82a) is the best balance for most longboard wheels.
What does 78A mean on longboard wheels?
78a-87a. Soft wheel good for rough surfaces, longboards, or street boards that need lots of grip to easily roll over cracks and pebbles. Designed for smooth rides, cruising, longboards, hills, and rough surfaces. 88a-95a. Slightly harder and faster with a little less grip, but the grip’s still good.
Can you slide 78A wheels?
Yes, you can slide with 78A wheels. Any durometer starting at 78A up to 86A can be suitable for sliding, depending on your weight and the feel.
What does 80a mean on longboard wheels?
The Sector 9 65mm 80a Butterballs. Durometer is the measurement of how soft or hard a wheel or bushing is. All wheels are placed on a scale ranging from 75a to 101a. The lower the number, the softer the material. The higher the number, the harder it is.
Do longboard wheels work on skateboards?
Cruiser and longboard wheels can fit on a regular skateboard. All you need to do is add risers to avoid getting wheel bite. You should also tighten your trucks and get medium to hard bushings. If you want to add cruiser or longboard wheels to your skateboard, get ½” riser pads and 1 ½” bolts.
What is Wheelbite on a skateboard?
The dreaded wheel bite occurs when a wheel comes into contact with the deck during a turn, stopping the forward motion. This causes a rider to loose balance and/or fall off the board. Thankfully, this issue can be avoided. Switching out your wheels to a smaller set will allow more room between the board.
What size longboard should I get?
To choose the right longboard setup, you are going to want to consider: Riding Style….Longboard Size Chart.
| Longboard Style | Rider Height | Longboard Size |
|---|---|---|
| Cruising | Up to 5’10” | 32-40″ |
| Cruising | 5’10″+ | 40″+ |
| Downhill | Up to 5’10” | 35-42″ |
| Downhill | 5’10″+ | 42″+ |
What size wheel is best for a longboard?
Most longboard wheels are between 64-80mm in diameter with 70mm being the most common size. The most important thing to consider is whether the wheels will fit on your setup without causing wheelbite.
Can longboard wheels fit on a regular skateboard?
Yes , you can slap a couple of longboard wheels on a regular skateboard, but it has its limitations. The parts don’t always go well together (in the first case) and riding it can feel awkward.
Can you put longboard wheels on a regular skateboard?
So the answer is yes you can technically put longboard wheels on a regular skateboard, but it comes with some limitations. There are a few things you have to consider before doing it, so before going into how to do it the best way we are going to address why you might want to do it.
What size longboard wheels for cruising?
The Bigfoot Longboard Wheels are the perfect wheels for cruising and moving through just about anything. These wheels are 76mm x 53mm and are rated 80A SHR for hardness. This means that these wheels are sure to provide the best grip and overall stability even at high speeds.