Is Monel K-500 Magnetic?
It is particularly well suited for centrifugal pumps in the marine industry because of its high strength and low corrosion rates in high-velocity seawater. MONEL K500 is non-magnetic.
What is K500 alloy?
Description: Alloy K-500, commonly referred to as “K-MONEL®”, is a precipitation hardenable, nickel-copper alloy. It has similar corrosion resistance to that of alloy 400, with the additional advantage of greater strength and hardness.
What is Monel K500?
Monel K-500 is a precipitation hardenable nickel copper alloy. K500 brings characteristics similar to Alloy 400 in respect to corrosion resistance, however, offers higher yield and tensile strength.
Does Monel metal contain copper?
MONEL metal is an alloy containing approximately 67 per cent nickel, 28 per cent copper, and 5 per cent other metals, which is made from a natural ore mined in Ontario, Canada. It is of great utility in cases where resistance to corrosion is important.
Is Monel corrosion resistant?
Stronger than pure nickel, Monel alloys are resistant to corrosion by many aggressive agents, including rapidly flowing seawater. They can be fabricated readily by hot- and cold-working, machining, and welding.
What is Monel used for?
Monel is used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. It is also used as part of metal instruments and frames of eyeglasses.
Is Monel magnetic?
Monel 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.
What is K Monel made of?
Monel is a group of nickel alloys, primarily composed of nickel (from 52 to 67%) and copper, with small amounts of iron, manganese, carbon, and silicon. Alloys with copper contents 60% or more are called cupronickel.
What are the properties of Monel?
Highly resistant to corrosion. Monel is well known as a corrosion strong, rust-resistant material. It is resistant to corrosion and acids, and some alloys can withstand a fire in pure oxygen.
What type of material is Monel?
nickel-copper alloys
Monel, any of a group of nickel-copper alloys, first developed in 1905, containing about 66 percent nickel and 31.5 percent copper, with small amounts of iron, manganese, carbon, and silicon. Stronger than pure nickel, Monel alloys are resistant to corrosion by many agents, including rapidly flowing seawater.
What are the properties of Monel copper alloy?
Terence Bell is a former writer who has been involved in the rare earth and minor metal industries for over 10 years. Monel 400 is a nickel-copper alloy that is resistant to corrosion in many environments. It consists of two crystalline solids that form a single new solid.
What are the properties of Monel alloy K-500?
MONEL K-500 TECHNICAL DATA 1 Type Analysis 2 Description. Monel nickel-copper alloy K-500 combines the excellent corrosion resistance characteristic of Monel alloy 400 with the added advantages of greater strength and hardness. 3 Application. 4 Corrosion Resistance. 5 Physical Properties. 6 Mechanical Properties.
What kind of corrosion resistance does Monel 400 have?
Monel 400 is a nickel-copper alloy with excellent corrosion resistance exhibits great features such as corrosion resistance, good weldability and moderate to high strength. It has excellent resistance to rapidly flowing brackish water or seawater. Monel 400 (UNS N04400) is widely used in the chemical, oil and marine industries.
What is the melting temperature of Monel K500?
Additionally, it can be further strengthened by cold working prior to precipitation hardening. The strength of Monel® K500 is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.