Does the H23 have VTEC?

Does the H23 have VTEC?

The H23 was an increased-stroke, non-VTEC version of the H22, used in Japan, North America, and Europe.

What’s the difference between H22 and H23?

H23A DOHC VTEC: Having the same horsepower rating as the H22A engine but it has a lower redline because it has a longer stroke than H22A. H23A DOHC VTEC has 87mm x 95mm (bore and stroke)and the H22A DOHC VTEC has 87mm x 90.7mm (bore and stroke).

Which is better h22 or H23?

The H22A is better. H23 has a really small Intake Manifold and TB which causes it not to make more power (197hp). Because of the small tb and Intake mani it does make a little more torque and make it a little earlier than the h22. Bore Stroke causes it to rev less than a h22.

What car does a H23 come in?

Found in the Japanese 1998-2002 Accord Wagon SiR (CH9). It produces 200 PS (147 kW; 197 hp) & 163 ft·lbf (221 N·m) and comes with a “blue top”. Found in the Japanese 1998-2002 Accord Wagon AWD (CL2). It produces 200 PS (147 kW; 197 hp) & 163 ft·lbf (221 N·m) and comes with a “blue top”.

What Gen is a 92 Prelude?

Fourth Generation
Fourth Generation Honda Prelude: 1992-1996 Still, with optional rear-wheel-steering and a new potent VTEC engine choice, this was the most technologically advanced, well-equipped, and, depending on how you spec it, the highest performance Honda then available short of the Acura NSX.

What car did the H23 come in?

Start with the basics H23A Vtec Blue Top 98-01: Found in the Japanese 1998-2002 Accord Wagon SiR (CH9). It produces 200 PS (147 kW; 197 hp) & 163 ft·lbf (221 N·m) and comes with a “blue top”. Found in the Japanese 1998-2002 Accord Wagon AWD (CL2).

How much boost can a h22 handle?

Re: how much boost on a h22 handle Sure, you can handle 8 pounds.

Is the Honda H23A1 Black Top VTEC?

H23A1 Black top was the version for North America. Main question is: Does H23A1 have VTEC? No, unfortunately, it is an ordinary engine. The engine power is 162 HP @ 5800 rpm, the torque is 212 Nm @ 4500 rpm. This engine was installed in Honda Prelude 4th gen.

What kind of engine does a Honda H23A have?

H23A DOHC VTEC. In 1998, Honda of Japan produced a rare DOHC VTEC version of the H23A engine for use in Japan only. It has been factory modified with an internal oil passage in the H23A block to operate the VTEC solenoid in the H22A head.

Do you need H23A sleeves for Honda engine?

To start, you will need H23A sleeves for your engine block to withstand a lot of power. Of course, stock internals should be replaced with forged pistons and H-beam rods (e.g., Eagle).

What’s the difference between H23A black top and blue top?

H23A – there are two versions of the JDM H23A: – H23A Black top – the standard version with open deck block. These engines were installed in JDM Ascot Innova. – H23A VTEC Blue top – the top version with the VTEC system. Its main difference was a PDE head, which was very close to the H22A Euro R head.