How do I fix my drone battery not charging?
Steps to fix:
- Connect the plug of the LiPo battery to the Nickel Metal Hydride Battery charger and start charging at the lowest possible current.
- After a minute or two of charging your battery should recover to about 3.3 volts per cell.
How do I reset my AR Drone?
To reset Parrot AR Drone 2, disconnect then reconnect the battery. Wait for the LED located underneath Parrot AR Drone 2 to turn green. Your drone will restart once you have done this.
How do I know if my drone battery is charging?
The intelligent flight batteries with the highest power level will be charged first. During the charging the status LED will blink green slowly. When the status LED indicator is solid green all the batteries are fully charged. Remove the batteries from the charging hub and the charging is complete.
How do I reset my DJI battery?
To reset it, you need to have the DJI charger on hand. Press the ON button two times and ignore any of the lights that may flicker. Do not press any other button but let the battery rest for another 5 minutes and plug in the charger but don’t press any button this time around.
How do I revive my DJI battery?
Try holding the power button for five seconds and see if any lights up. Also try pluggin battery in charger then turn power button on and see if that works.
How do you bring a LiPo battery back to life?
A dead LiPo battery. A LiPo balance charger….With these tools, It’s actually pretty easy to recover these batteries.
- Connect the main plug of your LiPo battery to your NiMH charger and start charging at the lowest current possible.
- After a minute or two your battery should recover to about 3.3 volts per cell.
Why does my Parrot AR Drone not charge?
The AR Drone does not power on when the battery is connected. See the “Battery will not charge” section to make sure the battery is fully charged. Press the red reset button located under the battery. You will need to use a stick or similar in order to reach the button.
Why does my AR Drone not connect to my phone?
The AR Drone will not connect to a smartphone or tablet via WiFi. Press the red reset button located under the battery. You will need to use a stick or similar in order to reach the button.
Do you need a new Charger for your drone?
The light on the charger should illuminate red while charging and turn green when finished charging. If this is not the case, a new charger may be necessary. Inspect the battery to make sure that there are not significant bulges. If the battery is deformed in any way do not attempt to charge the battery or use it in the drone.
What to do if your drone battery is deformed?
Inspect the battery to make sure that there are not significant bulges. If the battery is deformed in any way do not attempt to charge the battery or use it in the drone. Replace the battery and safely dispose of the old battery. If the battery is in good condition, check the voltage with a tool such as a multimeter.