How do I view sections in Solidworks model?

How do I view sections in Solidworks model?

To create a section view:

1. In a part or assembly document, click Section View. (View toolbar) or View > Display > Section View.
2. In the Section View PropertyManager, under Section 1, set the properties.
3. To section the model with additional planes or faces, select Section 2 and Section 3 and set the properties.
4. Click .

How do you make a sectional view in Solidworks?

Creating a Section View Manually

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section.
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line.
4. Click to place the view.

How do you create a section plane in Solidworks?

To use Live Section Planes:

1. Select a planar face or a plane, right-click and select Live Section Plane.
2. In the Live Section Planes folder, select the plane and rename it to LSP1 .
3. Click anywhere in the graphics area.
4. Right-click the plane’s border and select Fit to Part.

How do you do a cutaway view in Solidworks?

To create a part cutaway view:

1. In the part: Create a new configuration for the cutaway view. Cut the part as it should appear in the drawing view.
2. In the drawing: Create a model view of the part using the configuration you made for the cutaway. Add cross hatching to the cut faces.

What is a full section view?

When a cutting plane line passes entirely through an object, the resulting section is called a full section Fig. 7 illustrates a full section. It is possible to section an object whenever a closer look intentionally is desired.

What is a sectional view?

A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.

How do you make a sectional view?

When sketching an object or part that requires a sectional view, they are drawn by eye at an angle of approximately 45 degrees, and are spaced about 1/8” apart. Since they are used to set off a section, they must be drawn with care. It is best to use the symbol for the material being shown as a section on a sketch.

What are the 7 types of section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

Why sectional views are used in drawing?

What are the different types of sectional view?

6 Types of sectional views

• Full sections.
• Half sections or views.
• Offset sections or views.
• Broken out sections or broken views.
• Revolving sections or view.
• Removed sections.

What are the two important features of sectional view?

Rule 1: A section lined area is always completely bounded by a visible outline. Rule 2: The section lines in all areas should be parallel. Section lines shown in opposite directions indicate a different part. Rule 3: All the visible edges behind the cutting plane should be shown.

What is full sectional view?

Full sections. This is the most common section (called a full section) with the imaginary laser cutting a line across the entire construction, offering a view of a portion of the building with the rest of it put to one side.

How to create a section view in SolidWorks?

Use the Section View tool’s interface to insert common section views (horizontal, vertical, auxiliary, and aligned) and optionally, offsets (arc, single, and notch). You can combine offsets. Use the Section View tool and manually create sketch entities to customize your section lines.

How is a model shown in a section view?

In a section view in a part or assembly document, the model is displayed as if cut by planes and faces that you specify, to show the internal construction of the model.

What do you need to know about SolidWorks?

As a CAD package, Solidworks offers many ways to analyze a model. One of these tools, is the section view. This tool allows a user to view a model as if a section of it were removed to give a clearer view.

Is there a graphics only section in SolidWorks?

Final we see the “Graphics-only section” option. This option improves the speed of the resulting section but limits the options and functionality of the resulting section. In general, unless the part or assembly your cutting is very large, this option should be left blank.