Are snowmobile tracks interchangeable?

Are snowmobile tracks interchangeable?

Snowmobile tracks are generally interchangeable if you are replacing with the same dimensions and pitch of the tracks. However, be careful to check the front heat exchange clearance between the lugs and/or studs. There needs to be enough clearance there for you to use the new tracks.

Will a 120 track fit a 121?

yes it will fit, but you will have to change the drivers to accomadate the different pitches between the 2 tracks. in addition to changing drivers, you will need to factor in the driver tooth count as well. most the 120’s are a 2.86 pitch track and all the 121’s are 2.52 pitch.

What size track is on a 2002 MXZ 800?

121 X 15″
Check out our updated application chart here

Ski-Doo – 2002	Track Size	Qty. Hgt.
MXZX 800	121 X 15″	192
MXZX 700	121 X 15″	168
MXZX 600	121 X 15″	144
MXZ 500 TRAIL/SPORT	121 X 15″	120

What size track is on a 2000 MXZ 700?

136 x 1.5 on my 2000 MXZ 700.

How do you measure a snowmobile track?

How To Determine The Length Of A Snowmobile Track

1. Count the number of crossbars on the track.
2. Then multiply the number of crossbars times the pitch.
3. Example: 54 pitches x 2.86” = 154.44” (this track is called 155 by one OEM and 154 by another OEM.

When should I replace my snowmobile track?

4 Signs Your Snowmobile Track Needs To Be Replaced

1. Dry-Rotted Rubber. Ozone, a molecule found in the atmosphere, is the enemy of rubber, and unfortunately, exposure to the ultraviolet rays in sunlight only accelerates the weathering process of a snowmobile track.
2. Missing Lugs.
3. Missing Track Clips.
4. Worn or Torn Tracks.

How many windows are in a 121 track?

The 121 snowmobile track is a classic and has been the most common trail tracks for decades. It features a 2.52” pitch (the spacing between lugs) giving it 48 windows to stud.

What is the best snowmobile track length?

A longer track length is usually at least 136 inches (3.45 meters) long. They have deeper lugs for better traction and cover a larger footprint on the snow. They can navigate efficiently off-trail and in deep snow. They are usually reserved for snowmobiles with more powerful motors.

How long is the track on a Ski Doo Renegade?

Ski stance 1077 mm / 42.4 in. Ski overall length 1066 mm / 42 in. Track nominal width 381 mm / 15 in. Track nominal length 3487 mm / 137 in.

How do you measure the size of a track?

Three Steps to Measure Your Rubber Track Size

1. Measure the Width of the track in millimeters.
2. Measure the Pitch in millimeters. This is the distance between the centers of two links.
3. Links are also known as drive lugs or teeth.
4. Count the total number of links in the track.

How do you find the length of a track?

Length: To find the length we count the number of bars or lugs and then multiply this number by the pitch. The track shown has 45 lugs times the pitch of 2.86 and we get a 129″ track. A track that had 48 lugs would be a 137″ track.

How do I know if my snowmobile track is bad?

Take note of these four signs that your snowmobile track needs to be replaced:

1. Dry-Rotted Rubber.
2. Missing Lugs.
3. Missing Track Clips.
4. Worn or Torn Tracks.

How big is a Ski Doo snowmobile track?

X-Large Universal Cover. Fits snowmobiles 110″ to 115″ long (tail to nose) Ski-Doo Slide Black (sold each). Fit many late model performance Ski-Doo Snowmobiles. 44″ long for 121″ tracks. Ski-Doo Slide Red (sold each). Fit many late model performance Ski-Doo Snowmobiles. 44″ long for 121″ tracks.

What kind of Ski Doo tracks do you need?

Your mountainside demands dependable mountain tracks. Take on open meadows, deep snow, steep slopes, and so much more, with maximum traction and flotation. Mountain models include the Summit and Summit E-TeC Series! For better reach and grip in the deepest of snow, choose an Ski-Doo Tunnel Extension.

When to replace bottom plate on Ski Doo?

When the threads in the bottom plate are stripped from tightening the filter too tight, replace the bottom plate instead of replacing the carb. When the threads in the bottom plate are stripped from tightening the filter too tight, replace the bottom plate instead of replacing the carb.

Where can I get a snowmobile track fitment guide?

Welcome to our Skidoo snowmobile track fitment guide. The fitment information comes directly from Camoplast. Its meant to serve as a general fitment guide. Use it to shop with confidence for your replacement snowmobile track.