How do I enable SSD in Asus BIOS?

How do I enable SSD in Asus BIOS?

Solution 2: Configure the SSD settings in BIOS

1. Restart your computer, and press the F2 key after the first screen.
2. Press the Enter key to enter Config.
3. Select Serial ATA and press Enter.
4. Then you’ll see SATA Controller Mode Option.
5. Save your changes and restart your computer to enter BIOS.

How do I know if my SSD is in BIOS?

SOLUTION – Detecting the drive in the BIOS: In most cases the SSD will be automatically detected by the BIOS. In some cases the BIOS will display the drive model number while in other cases it will only indicate the existence of a drive and its capacity.

Can I put SSD in my ASUS laptop?

Before installing the SSD on your Asus PC you backup your data so that you do not lose any information and documents stored in the memory. To do this, you can connect to an external SSD (using a USB port with adapter) or using a box that can later be used to transform the old HDD into an external hard drive.

Why is my SSD not detected by BIOS Remo?

Causes for SSD not being detected? 1 Faulty or un-plugged Data cable 2 Un-updated drivers 3 Drive not enabled in the BIOS 4 Faulty SSD drive

Where does the SSD go in the BIOS?

They will have an EFI System partition containing the directory \\EFI\\BOOT\\bootx64.efi for removable devices like a USB drive or DVD, and for the Windows SSD it would be \\EFI\\Microsoft\\Boot\\Bootmgfw.efi. In my experience, UEFI BIOS will use these to identify what is UEFI-bootable and place them in the boot list.

Why is my hard drive not detected in BIOS?

If the drive is still not detected, there is a possibility that your drivers are not updated. To update drivers, go to the next step. If the device drivers in your system are outdated, there are chances that the hard drive may not be detected. To update device drivers, you can follow the steps below.

How can I restore an Asus HDD to a SSD?

You can also use Asus Backtracker while booted on the HDD to create a USB 3.0 16GB Flash drive to do the restore onto the SSD – don’t forget to remove the 1TB drive before doing the restore otherwise it will get erased.