What is Smart-UPS used for?

What is Smart-UPS used for?

Protect your servers, switches, routers and networking devices with the APC Smart-UPS SMT1500. This UPS provides backup battery power in the event of a power outage, monitoring and safeguarding your equipment from harmful power conditions, spikes and surges.

What is the meaning of Smart-UPS?

uninterruptible power supplies
The Smart-UPS is a series of enterprise-level uninterruptible power supplies (UPS) made by American Power Conversion (APC). With the exception of RT and SRT series, Smart-UPS units are line-interactive UPS systems, only running their inverters when the grid power is unavailable.

How do I update firmware on APC Network Management Card?

APC UPS – Upgrading the Firmware

1. Access the APC website support area and download the lastest version of firmware to your Network Management Interface.
2. Extract and start the firmware upgrade utility.
3. Enter the IP address of your UPS, enter the APC username and it’s password.

How do Smart UPS work?

When incoming utility power drops below or surges above safe voltage levels, the UPS switches to DC battery power and then inverts it to AC power to run connected equipment. These models are designed for consumer electronics, entry-level computers, POS systems, security systems, and other basic electronic equipment.

How does a UPS inverter work?

For line-interactive UPS, the inverter is part of the output. While the AC input is usual, the inverter will work in reverse to charge the battery and turn to battery power when the input fails. The switching time is lower than Offline UPS and is generally around 5 ms.

What are the different types of UPS?

The three major types of UPS system configurations are online double conversion, line-interactive and offline (also called standby and battery backup). These UPS systems are defined by how power moves through the unit.

How do I update PDU firmware?

Update the PDU Metering Unit Firmware (Original PDU)

1. Locate and download the latest version of the firmware.
2. Save the downloaded firmware ZIP file to a directory accessible to the PDU over the network.
3. Use the unzip command to extract the metering unit firmware from the downloaded ZIP file.

How do I update firmware on ap9630?

More videos on YouTube

1. Select the “UPS Network Management Card 2” link.
2. Scroll down to the product documentation tabs.
3. Click the Software and Firmware tab.
4. Find the firmware file.
5. Verify that you have located firmware appropriate for the host UPS family.
6. Click the “Download” Link.
7. Then Select the “Download Now” button.

What are the types of UPS?