What are the specifications for the 10Base2 standard?
10Base2 supports a maximum bandwidth of 10 Mbps, but in actual networks, the presence of collisions reduces this to more like 4 to 6 Mbps. 10Base2 is based on the 802.3 specifications of Project 802 developed by the Institute of Electrical and Electronic Engineers (IEEE).
What does 10Base2 mean?
10Base2 is among the family of Ethernet network standards for local area networks (LAN) that uses a thinner version of coaxial cable to establish a network path or medium and operates at a speed of 10 Mbps to carry out baseband transmission. 10Base2 is also known as cheapernet, thinwire, thinnet and thin Ethernet.
What is the diameter of a 10Base2 network?
Alternatively referred to as Thin Ethernet or Thinnet, 10BASE-2 is an IEEE standard for baseband Ethernet at 10 MBps over thick coaxial cable. 10BASE2 has a maximum distance of 185 meters. Thin Ethernet is five millimeters in diameter and used to connect machines up to 1,000 feet apart.
What is the maximum distance of CAT 3 UTP cabling?
Ethernet Cable Categories
| Category | Max. Data Rate | Max. Distance |
|---|---|---|
| Category 1 | 1 Mbps | |
| Category 2 | 4 Mbps | |
| Category 3 | 10 Mbps | 100 m (328 ft.) |
| Category 4 | 16 Mbps | 100 m (328 ft.) |
What is the speed of 10Base2 network?
What is the speed of 10BASE2 network?
Does 10BASE5 use fiber optic cable?
Fiber optic is a type of cable. 10BASE5 is an Ethernet networking standard that uses thick coaxial cable. 10BASE2 is an Ethernet networking standard that uses thin coaxial cable.
What does 10BASE2 stand for in Ethernet specification?
10Base2 is a shorthand term for an Ethernet specification using thin coaxial cable. 10Base2 is part of the IEEE 802.3 specification. It is also known as cheapernet or thinnet. The name 10Base2 is derived from several characteristics of the physical medium.
What kind of coaxial cable does 10BASE2 use?
10BASE2 (also known as cheapernet, thin Ethernet, thinnet, and thinwire) is a variant of Ethernet that uses thin coaxial cable, terminated with BNC connectors.
When did 10BASE2 and 10BASE5 become obsolete?
During the mid to late 1980s this was the dominant 10 Mbit/s Ethernet standard, but due to the immense demand for high speed networking, the low cost of Category 5 cable, and the popularity of 802.11 wireless networks, both 10BASE2 and 10BASE5 have become increasingly obsolete, though devices still exist in some locations.
How many devices can be on a 10BASE5 network?
The maximum network segment length is 500 meters, which is where 10Base5 gets the “5” in its name. The entire set of five segments cannot exceed 2,500 meters. You can have 100 devices on a 10Base5 network segment.