How do I check my gas meter reading?
To read correctly:
- Read the dials from left to right.
- If the pointer is between two numbers, always take the lower number.
- If the pointer falls between 9 and 0, write down 9.
- Ignore red dials, ones marked ‘100 per rev’ and the largest dial.
Can I give British Gas meter reading by phone?
British Gas has a number of different ways that you can submit a meter reading. Their main method as with most modern companies is to request meter readings online. If you would like to speak to a human, you can still call British Gas customer service directly and submit your meter readings over the phone.
What numbers do I submit for gas reading?
How to read a gas dial meter. Read all the dials from left to right, but ignore the large dial or any red dials. If the pointer is between two numbers, write down the lower number. If the pointer is between zero and nine, use nine.
How do you read a smart meter with A and B?
If your meter has an ‘A’ and ‘B’ button, press ‘A’ until you get to TOTAL ACT IMPORT. The number below this is your electricity reading. Your meter might have three buttons to the side of the display. If this is the case, just press the middle button, and the display will show your reading below the ‘IMP’ on screen.
How do you read a smart meter with A and B button Avro?
If your meter has A and B buttons under the screen To read the meter: press the A button. press the A button again until you see ‘TOTAL ACT IMPORT’ and numbers followed by ‘KWH’ write down the number from left to right.
How to read a gas meter and submit a reading-British Gas?
How to Read a Gas Meter and Submit a Reading – British Gas 1) Look at the five digits to the left of the decimal point, reading from left to right. 2) Ignore the other 3 numbers which may be shown in red.
How do you submit an opening meter reading?
You can submit your opening meter reading online. You’ll need to enter your email address, account number and postcode. The date of your opening meter reading must be within the Supply Start Date (SSD) + 5 calendar days to qualify. You can find the SSD on your welcome letter.
How to find out what your electricity bill is?
1 Press the blue button on your meter to get the screen information up. 2 Press the blue button again to go from screen to screen. 3 If you have a single rate meter for electricity, your reading is on screen H. 4 If you pay different rates for your electricity depending on the time of day, your readings are on screens H and J.
Where do I Find my electricity rate on my meter?
You may need to go through multiple screens on your meter. Each screen has a letter at the left of your display. Press the blue button on your meter to get the screen information up. Press the blue button again to go from screen to screen. If you have a single rate meter for electricity, your reading is on screen H.