What is the shift pattern on a 18 speed transmission?
The 18 speed transmission is laid out in an ‘H’ pattern. The easiest way to become familiar with the 18 speed is to practice shifting in an H pattern. The driver uses second, third, fourth, and fifth, then splits up into high range. Then, shift the H pattern again for sixth, seventh, eighth and ninth gear.
How can you identify a Eaton Fuller transmission without tags?
The first way is to locate the tag on the side of the transmission and identify its model designation. The second way is, if the unit does not have a tag follow the transmission identification chart in the next section to determine the model.
How much does a Eaton Fuller 18 speed transmission weight?
716 lbs.
Eaton 18 speed Transmission
| SPECIFICATIONS | CAPACITY | WEIGHT* |
|---|---|---|
| RTLO-16918B | 1650 lbs.ft. [2237 Nm] | 716 lbs. [324.77 kg] |
| RTLO-18918B | 1850 lbs.ft. [2508 Nm] | 716 lbs. [324.77 kg] |
| RTLO-20918B | 2050 lbs.ft. [2779 Nm] | 716 lbs. [324.77 kg] |
| RTLO-22918B | 2250 lbs.ft. [3050 Nm] | 716 lbs. [324.77 kg] |
How much oil does a Eaton 18 speed hold?
Approx. 28 pints [13.3 liters]. Integral oil pump standard. Oil to water heat exchanger standard on 18918B, 20918B and 22918B (Requires 2 pints [.
Do you need to clutch when splitting gears?
This is called double-clutching, and it’s necessary because you can’t split between low and high on the splitter while you’re in neutral, meaning that you have to toggle from “H” back to “L,” then shift into neutral, then operate the clutch again to get it into first.
Is Double clutching bad?
A: If you drive a modern manual car, you do not need to double clutch. It is no longer inherently good nor bad, though some people would say it makes shifting more deliberate, which extends life.
Is there an 18 speed Eaton Fuller transmission?
18 Speed Eaton Fuller Transmission. 18 speed Eaton Fuller transmissions in every model with automatic and manual models available. Whatever your Fuller transmission needs, we can help. We sell Eaton Fuller 18 speed heavy-duty transmissions in new and rebuilt options as well as genuine Eaton Fuller transmission parts ranging from rebuild kits,…
When do you need an Eaton 18 Speed Shift diagram?
Shift diagrams are required by the dot in case of emergency need to move your truck. Eaton fuller 18 speed transmission shift pattern. The innovative patented design features a simple mainshaft which is not splined to the auxiliary gear. Eaton fuller 18 speed transmission diagram.
Do you need a shift pattern decal for your Eaton transmission?
A shift pattern decal that explains how to properly shift the transmission should be in your vehicle. If you your shift pattern decal for your Eaton transmission has been lost, visit our webstore to purchase a replacement. Shift diagrams are required by the DOT in case of emergency need to move your truck.
When to use H-L splitter or Lo shift?
You rarely use the LO shifter position unless pulling away with a heavy load on an uphill. As you see by the picture below the manufaturer recommends that you don’t use H-L (splitter) when downshifting, just flick to 8L then go whole gears from there.