How do I setup my belong wireless modem?
Belong 4353 modem
- On your device open an internet browser and type 10.0.0.138 into the address bar.
- When prompted for the modem authentication username and password:
- From the top menu, select ‘Wi-Fi’
- Select the network you want to change (e.g. 2.4GHz / 5GHz)
- Type your new network name and /or password (network key)
Why is my belong modem not working?
You may need to reset your modem to its factory settings. By using a pen, toothpick or the back of an earring, press the reset pinhole button at the back of the modem which showed RESET and hold until the lights on the modem turn off, then release. Allow for the modem to re-establish a connection with the network.
Can I use a belong 4353 modem with another provider?
From a bit of googling it seems that the Belong 4353 is locked to Belong, and can’t be used with other providers. You could try contacting Belong to confirm.
Can I use my own modem with belong?
You can usually take your Belong modem with you when you move, whether you’re staying on the same technology type or switching between ADSL and the nbn network. When you place your online move request, we’ll check to see whether you have a modem that’s nbn-compatible, and organise a new modem if needed.
How do I reset my belong modem?
Hold for approximately 10 seconds (until all the lights on the modem turn off), then release. Wait for the power and Wi-Fi lights to turn back on (this will take approx 90 seconds) Once your modem has reset, you are ready to set up your modem for Belong on the nbn network.
What lights should be on my modem?
Should all the lights on my modem be green? The power light, downstream indicator, upstream indicator, online indicator, and link light on your modem should all be green. If your power light is yellow, it may be upgrading, so leave the modem on and give it a little time to do its thing.
Are Belong modems locked to belong?
Belong Modem Belong models are pre-configured with their network. But, they shouldn’t be locked and you can configure your modem for use with other networks. Log into the configuration web page and reset it this time using your new logins.
Are routers locked to ISP?
So long as you have service with that ISP, they are not required to provide you access to any devices (modem/router) that they sent in order to provide service to you.
How do I know if my modem is compatible with ISP?
Modem Compatibility The easiest way to check is to call your service provider or check its website to get a list of compatible modems. The manual and description of the modem may also include a list of service providers it works with.
Are Belong routers locked?
Belong models are pre-configured with their network. But, they shouldn’t be locked and you can configure your modem for use with other networks. Log into the configuration web page and reset it this time using your new logins.
Is the belong 4315 ADSL modem compatible with NBN?
I have the Belong (Sagemcom) 4315 ADSL modem. This has worked without problem for a few years now. We will have access to the NBN in about 6 months and so will be staying with Belong. That means we will receive or purchase the 4353 NBN capable modem. I spoke to Belong today after reading this post to confirm that we are getting the 4353 modem.
How do I connect my belong modem to my router?
Just connect from one of the lan ports at the back of the Belong modem into the WAN port of the new router No, better to connect LAN port of one to LAN port of the other, so they are on the same subnet. You just need to turn off DHCP on the second device, and it will act as a switch and wireless access point
Is the belong 4353 modem a good modem?
I have recently got a Belong NBN and i received the Belong 4353 modem. The service itself is good. However, the wireless strength is not good in one of my bedrooms. I tried both 2.4/5 GHZ. I also tried to change the channels to the least traffic one.
What’s the default IP for a belong router?
Belong, like many other RSPs, instead use DHCP ( also known as IPoE ). Setup the HG659B ( https://goo.gl/DM2eGr ) for Automatic connection without requiring a username / password combo ( you might have to first reset the HG659B ). Default IP: 192.168.1.254