How do I know if my Kraken pump is working?
The only way to accurately determine if your Liquid Cooling Pump is functioning, is by checking the Pump RPM. This will only be possible if the pump cable is connected directly to a fan header on the motherboard.
Why is my Kraken cooler not working?
To make sure your cable is put in correctly, make sure the rightmost pin is empty on the main power cable. This is the side you’ll have the cable facing when plugged into the cooler. If your cooler’s pump is still not working after verifying this cable is connected properly, please contact our customer service team.
How do I set my Kraken pump to 100%?
Once you have that installed, under manage select the Kraken or add it if isn’t there and then select it, then go to the window that has the core temperature and liquid temperature, look for the word ‘Edit’ click on it and a bar with +/- and fan speed will appear; click the + until your fans are at 100% then save …
How often should I replace thermal paste?
How Often Should You Replace Thermal Paste? In most cases, you shouldn’t need to reapply more than once every few years, though you should replace your paste if you remove your cooler for any reason. You may also want to consider reapplying thermal paste if you find your CPU temperatures are climbing.
How do I turn off Ibuypower lights?
Click on Onboard LED, then select Disable, and the RGB on your motherboard will shut off with your computer. Click on the Peripherals menu option and look for RGB Fusion near the top of the list.
What does red light on motherboard mean?
A red light on your motherboard means internal hardware is either plugged-in incorrectly or not working. Internal hardware examples include the CPU, RAM or a graphics card. Sometimes a dead CMOS battery may be the culprit. Boot errors on the hard drive where the primary OS is installed may also cause the red light.
Why is my Kraken z53 z63 z73 display or pump not working?
To make sure your cable is put in correctly, make sure the rightmost pin is empty on the main power cable. This is the side you’ll have the cable facing when plugged into the cooler. If your cooler is still not working properly after verifying this cable is connected properly, please contact our customer service team.
Why are my NZXT fans not lighting up?
Check that you are using only NZXT LED strips or AER RGB fans. Be sure that the SATA power is properly connected as it is what provides power to the LED strips. You can try using a different SATA power connector on your power supply to see if the port on the power supply is working correctly.
How many watts does a Kraken X63 use?
INCREDIBLE PERFORMANCE
| Kraken X53 240mm | Kraken X63 280mm | |
|---|---|---|
| Bearing | Fluid Dynamic Bearing | Fluid Dynamic Bearing |
| Power Consumption | 12V DC, 0.32A, 3.84W | 12V DC, 0.38A, 4.56W |
| Connector | 4-pin PWM | 4-pin PWM |
| Life | 60,000 hours / 6 Years | 60,000 hours / 6 Years |
Does Kraken X63 have RGB?
This All-in-One (AIO) liquid cooler is ready for high performance CPU’s with the ability to fit in most cases. With two 140mm Aer RGB 2 radiator fans it adds RGB lighting while keeping CPU performance high and keeping temperatures down.
Why is my Kraken M22 not lighting up?
If your Kraken M22, X42, X52, X53, X62, X63, X72, or X73 are not lighting up when your PC powers on, first please verify if the cooler is visible in our CAM software. If the product is not visible in CAM, this is a separate issue with recognition, the RGB will only turn on if Windows and CAM recognize a cooler when the PC starts up.
What should I do if my Kraken RGB is not working?
For X53, X63, and X73 cooler, please connect a Micro USB (Micro B) to USB Type-A cable from your cooler to the rear I/O. In the event RGB starting working again then that would indicate the Kraken USB cable is bad, please contact our customer service team for a replacement.
What kind of USB cable do I need for Kraken?
Next up, we’ll need to rule out the USB cable from your Kraken. For Kraken M22, X42, X52, X62, and X72 coolers, please connect a Mini USB (Mini-B) to USB Type-A cable from your cooler to your rear I/O. For X53, X63, and X73 cooler, please connect a Micro USB (Micro B) to USB Type-A cable from your cooler to the rear I/O.
Why is my Kraken cooler not lighting up?
Now if your Kraken cooler is not lighting up at all, is showing different colors than what you input, or is not responding to any changes in CAM, this may be caused by third-party software installed to your PC or a defect in the cooler.