How much does a fuel injection conversion cost?

Usually a replacement Fuel Injection Pressure Regulator will cost about $40-$200 depending on your car model. Installing it at a professional garage will cost about $50-$100. Just by installing it yourself, you have saved yourself about $200.

Can you put a Vortec motor in a TBI truck?

“Can I swap a Vortec motor in place of my TBI motor and does it just bolt in place?” Yes, you can swap a Vortec motor in place of a TBI motor, but no, it doesn’t bolt in place.

What is better EFI or carburetor?

Warren Johnson: Properly tuned, carburetors make more peak power than EFI in a Pro Stock engine. EFI performs well over 2,000 rpm or more. On average, if optimized, both systems perform about the same as far as how fast you get down the track. However, the EFI system is much easier to tune than a carburetor.

Can a GM TBI be used for fuel injection?

TBI Fuel Injection Conversion using a GM TBI EFI system! One of the most popular EFI conversions to older Chevy engines or any engine for that matter is the GM TBI system using the 1227747 ECM. There are many others that will do the same thing but the 1227747 is most well known and documented and will be the basis for this article.

Is there a complete TBI system for a 2bbl Chevy V8?

Pictured is a TBI complete system for a 2bbl Chevy V8. Some of the components shown above may look different from what will be included with your kit. The complete TBI system comes with all components needed for a closed loop system except for air cleaner, throttle cable/linkage, and fuel lines.

Do you need a coil for the TBI kit?

A coil capable of 40K+ volts is required and is not included with the kit; coils are available for purchase. Would you like the new coil and primary ignition wires?

What’s the difference between throttle body injection and TBI?

Throttle Body Injection = TBI The 4.3, 5.0 and 5.7 TBI’s are all the same CFM with 1 11/16th bores. The injectors are different sizes. The 454 is larger with close to 2 inch bores.