What is the default password for a DrayTek router?

What is the default password for a DrayTek router?

Logging onto a Draytek router The IP address for the Draytek routers available from Gradwell is 192.168. 1.1 (as below). You will then be directed to the web interface for the device and you will need to log in. The default Username for the device is ‘admin’ and the default password will be the same (see below).

How do I log into my DrayTek router?

How to login my Vigor Router

1. Connect a computer to one of the router’s LAN ports by an Ethernet cable.
2. Make sure the network interface is using an IP in the 192.168.
3. Open a browser on the computer.
4. After logging in, you will access the management page of the router.

How do I reset my DrayTek router password?

To change the router’s admin password, the process is similar for most models. Go to [System Maintenance] > [Admin Setting]. Enter the existing password in the Old Password box, then put the new password in both the New Password and Confirm Password boxes. Click OK to apply the change.

What is the default IP of DrayTek router?

DrayTek Access Point’s will receive an IP Address via DHCP automatically or if they are unable to contact a DHCP server they will use 192.168. 1.2 by default.

How do I connect my DrayTek router?

Vigor VDSL2 Routers Access the DrayTek router’s web interface via your web browser, which will be accessible on http://192.168.1.1 by default. Enter the username of “admin” and the default password of “admin”. 2. Browse to [WAN] > [General Setup], click [WAN1] and set the VLAN Tag insertion (VDSL2) setting to Enable.

How do I reset my DrayTek router?

With the router powered on (ACT LED blinking), press the Factory Reset button with a pin, hold a few seconds until the ACT LED starts blinking rapidly, then release the button. After that, the router will restart with the default configuration.

How do I find my DrayTek IP address?

Which is the default IP address for DrayTek router?

Login to the router with the default IP addresse 192.168.1.1 and then use the username / password: admin / admin To login with the modem DrayTek Vigor2860Vn-plus you will need to use the following default username and password: admin/admin Others IP addresses used by the router brand DrayTek

What is the IP address of DrayTek vigor2860vn-plus?

Ip Address: 192.168.1.1 Login to the router with the default IP addresse 192.168.1.1 and then use the username / password: admin / admin To login with the modem DrayTek Vigor2860Vn-plus you will need to use the following default username and password: admin/admin

What’s the default password for my vigor router?

The default login username and password are both admin. (If you can’t open the login page, see Why can’t I access my Vigor Router? to troubleshoot) NOTE: 1. For older models, the default username and password might be admin / (blank), (blank) / (blank), or draytek / 1234 .