What are the fatal five main causes of lockout/tagout injuries?
These were:
- Failure to stop equipment. While this may seem just common sense, it isn’t, due to some employee attitudes.
- Failure to disconnect from the power source.
- Failure to drain residual energy.
- Accidental restart of machinery.
- Failure to clear work areas before restarting.
How does lock out/tag out prevent accidents?
Lockout devices hold energy-isolation devices in a safe or “off” position. As positive restraints, they provide protection by preventing machines or equipment from becoming energized, because no one can remove them without a key or other unlocking mechanism, or through extraordinary means, such as bolt cutters.
How can lockout/tagout injuries occur?
Most accidents that still occur when lockout/tagout procedures are in place are a result of ignorance or improper training. It should seem obvious that a machine should be completely stopped and powered down before it is repaired or worked on, yet many accidents are caused by people who do not do so.
What is the major reason for safety lockout tagging?
What is the purpose of a lockout/tag out program? A lockout/tag out program will help prevent: Contact with a hazard while performing tasks that require the removal, by-passing, or deactivation of safe guarding devices.
Do lockout locks have to be red?
At a minimum, a lock’s shape, or size, or color must provide employees with the capability to identify and distinguish a lockout device from other similar devices (e.g., security locks) in the workplace. Moreover, the lockout devices cannot be used for purposes other than the control of hazardous energy.
What is a lock out/tag out violation?
The control of hazardous energy regulation, commonly known as lockout/tagout (LOTO), refers to specific practices and procedures to safeguard employees from the unexpected energization or startup of machinery and equipment, or the release of hazardous energy during service or maintenance activities.
When should you lock out your tag out?
Any time someone is going to enter into a machine or a hazardous area, the power should be removed and locked out so that the machine can’t be accidentally engaged.
Who should remove a lockout tagout?
4. Remove Lockout Tagout Devices: The Lockout Tagout devices are finally removed from an energy isolating device, only by the worker who applied it. The removal of employees lock without his knowledge can be dangerous, as a general rule, the Lockout Tagout device should be removed by the employee himself/herself.
What are the responsibilities of affected employees related to lockout tagout?
An affected employee becomes an authorized employee when that employee’s duties include performing servicing or maintenance covered under this section. In short, authorized employees perform LOTO procedures on a machine or equipment by placing LOTO devices, and perform servicing or maintenance.
What are danger tags?
Danger tags and lock-out devices are used for isolating equipment during cleaning, servicing, repairing or alteration, as described in Health & Safety: Isolation, lockout and tag out requirements.
What color must lockout devices?
Common practice is to use bright coloured (red) locks for high-risk operations, as most people recognise and aptly respond to this colour.
Who is affected by a lockout or tagout?
LOCKOUT / TAGOUT Definitions •Affected Employees – An employee whose job requires them to operate or use a machine or equipment on which cleaning, repairing, servicing, setting-up or adjusting operations are being performed under lockout or tagout, or whose job requires the employee to work in an area in which such activities are being
Do you have training on Lockout / Tagout?
All of us in the field have had repeated training on lockout/tagout. Lockout/tagout is often the topic of tailgate meetings and safety briefings. It is probably human nature to hear something so often and from so many sources that we go on autopilot at times.
How did the worker survive the tagout accident?
The injured worker was transported to a burn center where he received the appropriate medical attention. The worker survived this incident and received burn injuries to his right hand and a blow-out injury to his knee (Figures 5 and 6).
What are the dangers of sharing a lockout?
Sharing locks are a potential problem with equally dangerous consequences. In most cases, it is also overconfidence, experience and familiarity with the facilities or procedures that influences people to overlook these lockout basics. Preventing accidents at the workplace is a joint responsibility of the employer and employees.