How do you check Brocade SAN switch logs?

How do you check Brocade SAN switch logs?

Windows

1. Enter the IP or hostname of the Cisco or Brocade switch:
2. Make sure logging is turned on for “All session output” and then save the resulting putty.log file to a location of your choice.
3. For Brocade run the command supportshow.
4. For Cisco run the command show tech-support details.

What is principal switch in SAN fabric?

The first switch in the fabric is called the principal switch and this switch holds the master database for fabric configuration. When other switches are added to the fabric, they download that information from the principal switch.

How do you collect Supportsave?

Steps to collect supportsave.

1. Log on to the switch as admin using telnet or ssh.
2. At the command prompt type: supportsave.
3. You are prompted as: a) the IP address of your FTP server.
4. The files generated by this command are compressed before being sent off the switch.

How do I run a show support tech command?

Solution

1. Telnet to switch.
2. Set your telnet client to capture text to a file (procedure varies based on the client).
3. Execute the following commands: # term len 0. # show tech-support details.
4. Stop capture and verify that the data shows properly in the capture file; use any text editor, such as wordpad.

How do you zoning a SAN switch?

Configuring zoning on a Cisco FC switch

1. Clear the existing zones and zoneset if present.
2. Obtain the switch worldwide name (WWN): show wwn switch.
3. Configure the basic zone settings:
4. Create storage zones and add the storage ports to it.
5. Create an FCVI zone set and add the FCVI ports to it:
6. Verify the zoning: show zone.

What is the procedure for configuring zoning in Brocade?

Creating zones in a Brocade FC switch

1. Record WWPN. Members of a zone are identified by their World Wide Port Numbers(WWPN).
2. Check Config.
3. Create Aliases.
4. Create Zone.
5. Add zone to config.
6. Save config.
7. Verify config.
8. Enable config.

What does Cisco MDS stand for?

Cisco MDS (Multilayer Director Switch) Storage Networking Fundamentals (training)

How do I test a Cisco switch alarm?

To see the alarm configuration and status, enter the show env alarm-contact privileged EXEC command. For more detailed information about the alarm commands, see the command reference for this release. The switch supports the CISCO-ENTITY-ALARM-MIB for these alarms.

What is zoning in SAN switch?

Zoning is a procedure that takes place on the SAN fabric and ensures devices can only communicate with those that they need to. Masking takes place on storage arrays and ensures that only particular World Wide Names [WWNs] can communicate with LUNs on that array.

What are the health check commands on brocade?

Brocade health check commands psshow It shows power supplies status fanshow It shows fan status tempshow It displays internal temperature reading sensorshow It displays all sensors readings (power switchstatusshow Shows overall switch status (healthy or

What is the switchshow command on brocade switch?

A: For Brocade switches: The “switchshow” command displays switch, blade, and port status information.

What can you do with Brocade SAN health?

Brocade SAN Health is a useful free utility you can download from Brocade to analyse amongst other things the load on your Brocade switches, any errors plus a whole host of other things including a nice Visio diagram showing your topology. This is how you to download, setup and run Brocade SAN Health 1 Download from Brocade