Will my Jeep Wrangler tell me when I need an oil change?

Will my Jeep Wrangler tell me when I need an oil change?

One of the biggest conveniences of the Jeep Wrangler is that it comes with an oil change indicator system to let you know whenever standard maintenance is due. Depending on how hard you drive your vehicle, this should only be 7,500 miles or so.

How often does a Jeep Wrangler need an oil change?

Change that Oil! The Wrangler’s Owner’s Manual recommends changing the oil and filter when the Oil Change Indicator System alerts you to do so, but recommends intervals not exceed 12 months or 10,000 miles, whichever comes first.

How do you reset the change oil light on a Jeep Wrangler?

How to Reset the Change Oil Alert on a Jeep JK

1. Put your Jeep in “Park” and turn off the engine.
2. Turn the ignition to the “On” notch, without starting the engine.
3. Push the gas pedal to the floor three times (within ten seconds). Turn the ignition to “Off,” and then start the engine to verify that the alert is turned off.

How long can I go without an oil change jeep?

Cars can generally go 5,000 to 7,500 miles before needing an oil change. Furthermore, if your vehicle uses synthetic oil, you can drive 10,000 or even 15,000 miles between oil changes.

How do I know if my Jeep needs an oil change?

If the oil appears to be gritty and dark, it means that it may be time to schedule your oil change. Oil entering your vehicle has a golden amber color. Since one of its jobs is to keep the metal parts and components in your engine clean, it tends to pick up some dirt and debris along the way.

How long can a Jeep go without an oil change?

What type of oil does a 2008 Jeep Wrangler take?

The 2008 Jeep Wrangler SAE 5W-20 engine oil is recommended for all operating temperatures.

How long can you drive with oil change light?

Generally speaking, you have about 2 weeks or 500 miles of driving before a flashing oil light turns into a legitimate problem. But once it hits that point, things can go downhill fast, leading to serious mechanical damage. So, try to get your vehicle into a mechanic sooner rather than later.

What happens if you don’t change your oil for 10000 miles?

Depending on the vehicle and oil, the time between oil changes could range from 3,000 to 10,000 miles. But what happens if you decide to skip oil change? The end result is that your engine won’t last as long as it could. It might also mean an extravagant bill for an engine replacement or a sooner-than-expected rebuild.

How long can you go without an oil change after the light comes on?

Coming back, how long can your car go without an oil change? Your engine will run smoothly even if you do not change the oil too often or if you run the vehicle over the set limit. If your engine can tolerate, it will take your vehicle anywhere between 5,000 to 6,000 miles.

How to reset the oil service Light Jeep Wrangler?

To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure: Turn the ignition switch to the ON/RUN position, do not start the engine. Fully depress the accelerator pedal slowly three times within 10 seconds.

What does the oil change indicator mean on a jeep?

If your Jeep’s Oil Change Indicator system is indicating that your vehicle is ready for servicing, have it checked out by a certified mechanic, such as one from YourMechanic. Click here, choose your vehicle and service or service package, and book an appointment with us today.

How to reset the oil change indicator system?

After your oil change and servicing is complete, you might need to reset the Oil Change Indicator system in your Jeep. Learn how to do this by following the directions below: Step 1: Insert key into the ignition and turn key to “ON” without starting the engine. Step 2: Slowly depress…