How much is a load of gravel in Indiana?
A truck load of gravel costs $1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance.
How much does gravel cost per square meter?
Local gravel will be an affordable option; stones from further afield will be more pricey, but will also offer a greater variety of appearance. At a base, expect to pay around $10-15 per square metre.
What type of gravel is best for a driveway?
These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.
- Crushed Stone #411. It is crushed up #57 stone combined with rock dust.
- Quarry Process.
- Pea Gravel.
- Jersey Shore Gravel.
- Marble Chips.
- Blackstar or Blacktrap Rock.
How do you calculate gravel for a driveway?
Measure the length and width of your driveway in feet. Multiply the length by the width to get surface area and divide the result by three because 4 inches is 1/3 of a foot. You now have the volume of gravel needed in cubic feet. Divide the volume in cubic feet by 27 because there are 27 cubic feet in a cubic yard.
What is the cheapest gravel for a driveway?
Crush and run is one of the cheapest materials that can be used in a gravel driveway at about $0.40 per square foot. Cost per cubic yard is about $20 and per ton about $28.
How much will a ton of gravel cover?
A ton of gravel will cover approximately 100 square feet, 2 inches deep.
How many square feet will 5 tons of gravel cover?
Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.
How many inches deep should a gravel driveway be?
Driveway Layers A gravel drive should have a first layer of baseball-sized stones at least 4 inches deep. According to Tim Carter of AskTheBuilder.com, each layer thereafter should be 4 inches thick and in gradually smaller stone.
How much would a ton of gravel cover?
How much gravel do I need for a 2 car driveway?
A regular measuring tape usually measures up to 25 feet or 50 feet. Decide on the depth of the rock you are purchasing. According to the Home Depot, 4 to 6 inches of rock or gravel is needed for a driveway.
What is number 3 gravel?
A commonly used gravel size for driveway base layers is #3 gravel. This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.