How do I calibrate my Vantage Pro2?

How do I calibrate my Vantage Pro2?

You can calibrate inside & outside temperature, inside & outside humidity, as well as any extra temperature/humidity sensor readings you have transmitting to your Vantage Pro2. Select a variable to be calibrated. Press and release 2ND, then press and hold SET.

How do I reset the Davis weather station?

The Vue and VP2 consoles do not have a formal reset switch. Instead, rebooting is achieved simply by powering down the console completely and then repowering it. Powering down means removing all sources of power, ie both mains and battery power (removing one battery is sufficient to remove battery power).

How do I reset my Davis Vantage Vue?

The Vantage Vue and Vantage Pro 2 consoles do not have a designated “reset” switch. So, initiating a reboot requires completely powering down the unit by removing all power sources, i.e. the main power cord and the batteries. Leave the power disconnected for at least 10-20 seconds before restarting.

How do you calibrate a weather station?

Now you can calibrate your Ambient Weather system. Bring the outdoor sensor indoors. Place the red spirit thermometer next to the sensor, near to the weather system console, let them come to equilibrium for an hour, and look at the thermometer reading versus the indoor and outdoor reading on the weather station.

How do I connect my Davis weather station to the Internet?

Process:

1. Complete installation of your weather station.
2. Connect the Weatherlink IP device to the Vantage Vue or Vantage Pro 2 console.
3. Connect the Weatherlink IP to the Internet (plug it in to your router).
4. Create a free Weatherlink account at www.weatherlink.com.

Where is the best location for a weather station?

Ideally mounted at a height of 4 to 6 feet above the ground. Ideally located at a horizontal distance of 4 times the height of the nearest obstruction. Ensure the gauge is mounted level to the ground, away from any horizontal surface that can introduce rain-splashing or surrounding snow buildup.

Where are the Davis vantage Pro2 weather stations?

For Vantage Pro2 ™ & Vantage Pro2 Plus ™ Weather Stations Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545 • 510-732-9229 • www.davisnet.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

What is the version of weatherlink for Vantage Pro2?

•Any version of WeatherLink for Vantage Pro and Vantage Pro2 (Windows version 5.2 or later (6510USB, 6510SER, 6540, 6544, 6550, 6560, 6510C), Mac OS X version 5.01 or later (6520, 6520C)) Wireless Weather Envoy: The following optional accessories are designed for use with your Envoy.

How does the vantage Vue wireless weather station work?

The console of your new Vantage Vue wireless weather station displays and records your station’s weather data, provides graph and alarm functions, and interfaces to a computer using our optional WeatherLink®software.

What kind of power supply does vantage Pro2 use?

Cabled Vantage Pro2 Stations Cabled Vantage Pro2 consoles supply power to the Integrated Sensor Suite (ISS) through the console cable. Because of the added power consumption of the ISS, the cabled console requires an AC power adapter used as the main power supply. The console batteries provide backup power for up to four to six weeks.