What is teak and holly flooring?
Teak & Holly uses a tropical hardwood for its core veneers, constructed with a waterproof glue. Due to the natural oils and silica found in teak, it can clog sand paper and dull edged tools. Teak & Holly can be finished with traditional oil or varnish for a desirable “bright” appearance.
What is the cabin sole?
Most sailboat cabin soles are a combination of flat rectangles and triangles or trapezoids. When cutting new material to fit these odd-shaped areas, it is hard to use the stock efficiently, so treat the triangles and trapezoids as rectangles. Add up your total square footage and multiply by 1.1.
How hard is Holly Wood?
Holly’s mechanical properties are in the middle for North American hardwoods. The strength (MOR) of holly is 10,300 psi. The stiffness (MOE) is 1.1 million psi. Hardness is 1,020 pounds.
What is the sole of a boat?
SOLE – Cabin or saloon floor. Timber extensions on the bottom of the rudder. Also the molded fiberglass deck of a cockpit.
Why is holly wood so expensive?
The reason holly is a little pricey is that it is very hard to dry and keep straight. You generally cannot get large timbers, either. It grows kind of funny in the wild if surrounded by other trees, and doesn’t get all that big. Also not as common as other hardwoods.
Is holly wood good for anything?
Comments: Holly is typically used only for ornamental and decorative purposes. It has a fairly large shrinkage rate, with a lot of seasonal movement in service, and its strength properties are mediocre for a hardwood.
What is the most waterproof plywood?
Your best choices are either ACX or marine grade plywood. Both are made with waterproof permanent phenolic (WBP) glue, but there are some important differences between ACX vs marine grade plywood.
What is the interior of a boat called?
Cabin – A room inside the boat, which can refer to the entire interior or just one room designed for sleeping.
What was the poop deck on a ship?
Thus the poop deck is technically a stern deck, which in sailing ships was usually elevated as the roof of the stern or “after” cabin, also known as the “poop cabin”. On sailing ships, the helmsman would steer the craft from the quarterdeck, immediately in front of the poop deck.
What’s the best thickness of teak veneer for a cabin?
The thickness of the teak veneer is 2mm. A good thickness of teak veneer (1.2mm) in 4 x 10 sheets. Thicknesses of 6mm and 9mm available.
What kind of plywood is used for cabin soles?
Our teak and holly plywood is made by applying teak and holly veneers to an exterior type plywood substrate, usually meranti. The plywood is typically used for interior cabin soles in boats. Customers have also used the product for exterior applications such a boat decks, however No Warranty is available for exterior application.
How big is a teak cabin floor panel?
Traditional cabin sole pattern with alternating strips of teak (2-3/8″ wide) and contrasting light wood (1/4″ wide). Panels are 4′ x 8′ with veneer pattern running in the 8′ direction. Constructed with waterproof glues.
What is the thickness of teak decking sheets?
A good thickness of teak veneer (1.2mm) in 4 x 10 sheets. Thicknesses of 6mm and 9mm available. providing good durability of product. Solid Teak Decking sheets for the exterior or interior. any length you need!
https://www.youtube.com/watch?v=2SZT-OBk_0s