How much does it cost to have grease trap cleaned?

How much does it cost to have grease trap cleaned?

Indoor Grease Trap Cleaning Cost The cost to pump and clean a indoor grease trap that has been maintaned reguarly can average from $175 – $475. Grease traps that have not been serviced and maintained regularly can cost up to triple the normal price.

How often should a grease interceptor be cleaned?

every one to three months
How often should grease traps be cleaned? The frequency of restaurant grease trap cleanings vary with how often the kitchen produces FOGS. On average, cleanings should be performed every one to three months.

How do you maintain a grease interceptor?

Follow these guidelines to keep your grease trap in good condition:

1. Use strainers in the sink.
2. Wipe grease out of pans before washing.
3. Don’t pour oils down the sink.
4. Repair leaking taps.
5. Don’t leave taps running unnecessarily.
6. Have your grease trap pumped out on a regular basis.

How much does a grease interceptor cost?

The average install for a small grease trap (0-100 gallons) is between $250 and $1500. The average cost for the installation of a new grease trap (750 to 1500 gallons) is between $4000 and $8500. How often should a grease interceptor be pumped out?

How much does i cost to clean a interceptor?

Indoor Grease Interceptors Most indoor grease traps with easy access are 30-200 gallons, and most pumpers will charge between $125-$180 to pump out these types of traps, provided the service is set up on an ongoing basis. Most pumpers would charge $190-$240 to just do a “one-off” pumping.

How do you deep clean a grease trap?

For a thorough cleaning, utilize the shop vacuum to suck out any lingering FOGs from the grease trap. Next, refresh the grease trap and free the tank from obnoxious odors with a little elbow grease, a steel pot scrubber, dish soap and tepid water. Thoroughly scrub down the grease trap’s baffles, sides and lid.

How do you unblock a grease trap?

How to Clean Your Grease Trap

1. Remove the lid from the grease trap.
2. Stick a ruler into the grease trap and note how many inches of grease are in the trap.
3. Remove the water from your grease trap, either with a bucket or a small pump.
4. Start scooping out the grease from your trap.

What happens if you don’t clean a grease trap?

If the grease trap isn’t cleaned out at least once every three months or so, depending on the individual situation, it will end up becoming so clogged with waste that it will block the sewer line. That will cause the sewer line to back up, creating all sorts of really unpleasant and frustrating problems for you.

What is the difference between a grease trap and grease interceptor?

Grease traps are much smaller (typically about the size of bread box to a small mini-fridge), while grease interceptors are much larger. Capacity/flow. Grease traps handle flow rates of 10–50 gallons per minute, while grease interceptors accommodate flow rates of more than 50 gallons per minute.

How do you clean an outside grease trap?

What is the difference between a grease interceptor and a grease trap?

Grease traps handle flow rates of 10–50 gallons per minute, while grease interceptors accommodate flow rates of more than 50 gallons per minute. Pressure. Grease traps work best in a low-pressure water environment, whereas grease interceptors are more appropriate for high-pressure environments. Installation.

What makes Endura grease management a Better interceptor?

Building on a field proven approach to grease management. What makes Endura® a better interceptor? Endura grease management products have demonstrated effective, efficient and consistent performance with over a decade of field installation and operation.

Are there any problems with the Endura interceptor?

After years of research, customer interviewers, and expert tinkering, Endura interceptors enjoyed an encouraging market debut. But as the reviews started rolling in, we learned many users were having problems with the covers. Bolts were being cross threaded, rusted, or just straight up lost.

What kind of Grease cover does Endura XL 150 have?

40150A04C – Endura XL 150 with Cast Iron Access Covers with 2 pry points and pick hole for easy removal The Endura XL150 is offered in different specifications to provide application-specific solutions where added grease capacity is required.

Which is the highest performing IPEX grease interceptor?

For over a decade, IPEX has manufactured some of the highest performing hydromechanical grease interceptors in North America. The Endura line carries a number of international patents and offers solutions from 7gpm through to 150gpm with the addition of the Endura XL models.