How wide is Kaycan soffit?
10” Vented Soffit: Perforated Double profile with Single Nail Hem, 10” wide exposure configured as two 5” panels, thickness 0.042” ± 0.001”, 12ft length.
What colors do aluminum soffits come in?
Aluminum soffits come in a lot of different colors, but you’ll probably find only brown and white at most home centers and lumberyards. If you’d like a greater selection and usually higher-quality materials, look under “Siding Materials” in the Yellow Pages to find out where the pros shop.
How many pieces are in a box of soffits?
Triple 4˝ packaged 16 pieces, 12´0˝ long, 1.92 squares per carton.
What gauge is aluminum soffit?
Matrix soffit panels are produced in 29-gauge and 24-gauge Galvalume. They are 3/8-inch-high and provide 12-inch-wide coverage.
Is vinyl soffit better than aluminum?
Vinyl also has a higher impact resistance than aluminum which adds to its durability. When used under eaves, it helps to improve insulation. Less energy is utilized to heat and cool the house which brings down your energy costs with time. Vinyl soffit is low maintenance yet it keeps in good shape for a long time.
How do I install Kaycan soffit?
To install the first soffit panel, insert end into J-trim, tack the ends at wall and at fascia through groove and nailing slot. Insert each successive panel so that the tongue locks into the groove of the previous panel.
How much does aluminum soffit cost?
The national average materials cost to install an aluminum soffit is $2.58 per linear foot, with a range between $2.06 to $3.11. The total price for labor and materials per linear foot is $10.36, coming in between $6.86 to $13.87.
What are soffit vents?
Soffit vents are roof ventilation devices installed underneath the eaves of a roof that extend past the warm wall line. When properly combined with other roof ventilation devices, soffit vents allow fresh air to enter into an attic creating air flow.
How much is a box of soffit cost?
Vinyl soffits cost between $4 and $20 in 12-foot lengths, which means the average cost of vinyl soffits for a job totaling 1,200 square feet is $1,200 to $1,500. For a roof whose perimeter is 160 feet, the boards for the fascia would total about $100; the drip edge would come to $96.
How do I stop my aluminum fascia from buckling?
To prevent the rake fascia from creeping downhill, the bottom edge of the fascia should be slot punched, then held in place with three or four aluminum trim nails driven into the subfascia. These slots permit the fascia to expand and contract lengthwise without buckling.
Can you use J channel for soffit?
The first step in installing soffit is to install the proper receiving channels. You have several options for receiving channels. You can use accessories such as F-channel or J-channel, or you can make channels using coil stock.
How long do aluminum soffits last?
Wood, and vinyl can become faded, and look as if the sun took a personal disliking to it after only a few years, while aluminum colors are baked in, and once installed will continue to look great and protect your home for up to 20 years.