How much does it cost to replace a differential?
If new gears are needed the price can be at least $1,500. Going to the worst-case scenario, if the differential is beyond repair, you’ll need the component to be replaced altogether. You can expect a rear differential replacement to cost up to $4,000.
How can I tell what rear end is in my Chevy truck?
All Chevrolet rear ends can be identified by comparing the gasket shape to an identification chart similar to the one found on Drivetrain’s differential identification page (see References). A visual chart of different GM/Chevrolet rear ends is found on Ring & Pinion’s differential types web page (see References).
How do you know if your differential is bad?
Here are the most common bad differential symptoms to look out for:
- Your vehicle is quickly going through oil.
- Difficulty steering.
- A loud front differential noise, such as the grinding of gears, clunking, or a “howling” sound.
- Rear differential noises.
- Extensive and inexplicable wear and tear on your tires.
What GM differential do I have?
Information about Differentials in GM vehicles can usually be obtained by looking at the RPO or “Regular Production Option” codes contained in the Service Parts Identification tag in the glovebox. Whenever possible, reference the tag numbers when ordering parts for your Differential.
What rear differential do I have?
To figure out exactly what axle you have, you can look for the Dana stamped bill of materials number. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.
How can you tell the difference between an 8.2 and 8.5 rear end?
Another way to tell the difference between an 8.2 and an 8.5 rearend is to pull the cover and look at the bolt holding the spider gear crosspin. If it takes a 1/2-inch wrench to remove it, it’s an 8.2. If it takes a 5/16-inch wrench to remove it, it’s an 8.5.
Is 3.73 a good gear ratio?
FACT: A 3.73 axle ratio is ideal for towing heavy loads on flat terrain and will produce increased fuel economy during steady-state, long-distance highway driving.
How long does it take to replace a rear differential?
three to five hours
A complete rear differential replacement includes replacing the housing, gears, bearings, and seals. The average time it takes a certified mechanic to perform a differential rebuild at a shop is usually three to five hours. A rebuild on a commercial vehicle by someone without prior experience could take much longer.
How do I know if I have an 8.5 rear end?
What does differential do I have in the rear?
The differential is what allows the wheels to turn at different speeds . The vast majority of rear-wheel drive cars have an open differential. This means that the rear wheels can spin independently of each other. The easiest way to tell if you have an open differential is to jack up the car and spin one of the rear tires.
Does every car have a differential?
However, differential is present in case of cars that have front mounted engine and have a front wheel drive system too. So basically, all cars have at least one differential that split power between the wheels.
Which is rear differential do I have?
The rear differential is an integral part of your vehicle that transmits torque and rotation through shafts running the length of the automobile. The rear differential allows all four of the vehicle’s wheels to rotate at different speeds which is essential for road traction and stability.
What is a differential on a car or truck?
The differential is a device that splits the engine torque two ways, allowing each output to spin at a different speed. The differential is found on all modern cars and trucks, and also in many all-wheel-drive (full-time four-wheel-drive) vehicles. These all-wheel-drive vehicles need a differential between each set…