How does the easy heat thermostat work?
When installed, the convenient EH38 automatically energizes the cable at temperatures lower than 38°F/3°C and then shuts off power when the temperature rises to 50°F/10°C. Other than that it should function perfectly for roof and gutter wires as long as you plug it in outside.
What is a thermostatically controlled device?
ther·mo·stat. A device, as in a home heating system, a refrigerator, or an air conditioner, that automatically responds to temperature changes and activates switches controlling the equipment.
Are heat cables safe?
When heating cables are poorly designed or manufactured, they can pose safety risks that are not worth the cost. According to the Consumer Product Safety Commission, about 3,300 residential fires occur each year because of heat cables. These fires cause 150 injuries, 20 deaths, and over $20 million in property damage.
How hot do heat cables get?
Low-temperature self-limiting heating cables usually top out at about 160°F – which is to say, a lot hotter than you need it if you’re just using it to keep pipes from freezing. The cable will draw a lot of energy trying to get to its top-out temperature, unless you add a temperature controller.
Why does my thermostat setting not match my home’s temperature?
If your thermostat is not able to accurately read the temperature in your home, it will not be able to regulate it properly either. It is possible that your thermostat is dirty inside, which can affect its reading of the temperature.
What temperature should you set your thermostat?
What temperature should my house be? Or better yet, “What is the most energy saving temperature to set my thermostat at?” According to ENERGYSTAR.gov, the ideal home temperature should be in between 70 to 78 degrees Fahrenheit.
What is a thermostatically controlled heater?
Thermostatic temperature control systems consist of a thermostat plus some sort of heater and/or cooler. The thermostat is a thermally actuated switch that changes between the “on” and “off” state at a specific temperature, usually adjustable. Temperature control systems like this always oscillate.
How long can you leave roof heating cables on?
The cables are there to prevent ice dams. They should not be left on 24 hours a day and usually aren’t used above like 40° weather. The cables are expensive to run so use needs to be frugal. Everyone has their own idea about how to use the cables.
Can heat cable be submerged in water?
Heating cord Available with housing styles that are resistant to water and many chemicals, and suitable for outdoor use. Some styles are resistant to moisture or suitable for use on electrically conductive surfaces, but they must not be submerged, and are generally intended for indoor applications.
Can heat cable be buried?
Heat tape won’t last buried. Either dig it deeper or do what Debbie suggested.
What do I need to install an eh38 heater?
Installation is easy. Simply unplug the heating cable, plug in the EH38, and then insert the heating cable plug into the device. The handy EH38 can control other electrical devices that need to be activated when temperatures approach the freezing point.
What should the temp be for an eh38 cable?
Without on/off control, however, these cables remain energized. When installed, the convenient EH38 automatically energizes the cable at temperatures lower than 38°F/3°C and shuts off power at 50°F/10°C.
Do you need a power on or off control on an easyheat cable?
Many include built-in thermostats for automatic power-on/power-off operation. Self-regulating heating cables, such as EasyHeat’s Freeze Free, generally do not need these controls: the heat output and energy usage of these cables are reduced as temperatures rise. Without on/off control, however, these cables remain energized.
Are there any self regulating radiant heating cables?
Automate self-regulating cable installations in dry locations for savings in energy and cost with the simple yet powerful EH38 thermostatically controlled device from Easy Heat. Electric radiant heating cables offer different features for freeze prevention applications. Many include built-in thermostats for automatic power-on/power-off operation.