What should I torque my Beadlocks to?
Tighten the bolts to the following torque specs: (using the criss-cross pattern) 12” and 14” HD Beadlock: 10ft/lbs. 8. Use tire mounting lube only on the tire/wheel opposite the beadlock (the inner bead) to ensure a proper seat for the tire.
How often do you torque Beadlocks?
Then inflate the tire to a normal pressure. All of mine seated at around 25 psi. Note: Method beadlock wheels need to be deflated so ring bolts can be retorqued 50 miles after the initial installation. In addition, every 200 miles after that, or after rigorous off road use, you should recheck them as well.
Can Am factory beadlock torque specs?
The beadlocks bolts are actually 93 in/lbs according to that diagram. It’s the wheel nuts that are 74 ft/lbs. ITP and Hiper both recommend 12ft/lbs on their beadlocks which is 144 in/lbs .
How much do AEV wheels weigh?
Size: 17″ x 8.5″ Weight: 33 lbs.
How tight should beadlock bolts be?
Using a torque wrench, again in a criss cross pattern, tighten all of the bolts to (10-12 foot pounds on a 8, 9, 10, or 12-inch wheel, and 20-22 foot pounds on a 14-inch wheel.) We generally work them down in steps.
Should I use anti seize on beadlock wheels?
Antiseize prevents galling, which is common on beadlocks, and also leads to more accurate torque readings. If you’re having problems with losing bolts, then we would recommend rechecking the torque on the bolts several times after installing new tires.
Do you have to torque beadlocks?
You need to keep tightening them up until they are all torqued the same. As you tighten one bolt up, the two around it will be loose again. I usually go 3 times around the wheel before I am satisfied, and check it again after 100 miles.
How tight should Beadlock bolts be?
Can Am XRS Beadlock torque?
The manual states 21 Ft Lbs final torque.
Where are mammoth wheels made?
the USA
Mammoth Features: Assembled and trued in the USA by experienced wheel smiths. 6061-T6 billet hubs, massive 3/8″ Stainless Steel Spokes, spin steen rim. Sealed for tubeless tires.
How do you tighten beadlocks?
Finger-tighten them all the way around the beadlock. Make sure the tire is staying centered around the wheel. STEP 5: Now in a crisscross pattern, using a small wrench or T-handle, lightly tighten each bolt.