How many outputs does the Scarlett 18i8 have?
Focusrite Scarlett 18i8 – Features: Four Focusrite mic pres. 18 inputs and 8 outputs. Two independent headphone outputs each with a level control.
What are line outputs on focusrite?
The line outputs are 3-pole (TRS) ¼” (6.35 mm) jack sockets, and are electronically balanced. Typical consumer (Hi-Fi) amplifiers and small powered monitors will have unbalanced inputs, either on phono (RCA) sockets, or via a 3.5 mm 3-pole jack plug intended for direct connection to a computer.
How do I use focusrite outputs?
Go to Focusrite Control, then click Line Outputs 3-4 (Headphone icon) to select your headphones. Click the + in the Software (DAW) Outputs area, then select 3+4. Press play in your DAW and check the levels in Focusrite Control to make sure you’re getting metering on both Software Playback tracks.
How many inputs is 18i20?
18 inputs
The Focusrite Scarlett 18i20 has 18 inputs and 20 outputs. If you want to route audio between your DAW and a physical source such as a mixer using your Scarlett 18i20, your DAW’s I/O needs to correspond to the I/O within Mix Control. In Mix Control, analog inputs 1-8 are inputs 1-8.
What are line outputs for?
Line Out (or Line Output) is an audio port that is used to send line-level audio signals from one audio device to another. On the other hand, Headphone Out is an audio port that delivers an amplified line-level signal meant to drive headphones.
Why do audio interfaces have so many outputs?
The ability to hear your mix on different speakers (or monitors) is one of the most common reasons for having multiple outputs, but there are many other uses too: Most interfaces with two outputs also feature a headphone output, but the headphones will usually receive the same signal that goes to your speakers.
How do you set up a Focusrite Scarlett 18i8?
All you need to do is power your Scarlett 18i8 using the mains adapter supplied, and then connect its USB port to one on your computer. Once connected, you will see that the device is recognised by your PC or Mac and the Quick Start tool will guide you through the process from there.
Does Focusrite Scarlett 2i2 have phantom power?
Scarlett 2i2 & 48v (Phantom Power) The Focusrite Scarlett 2i2 audio interface provides 48v as an option for both microphone inputs. This power will affect different types of microphones in different ways: Condenser Microphones – Required. Ribbon Microphones – Not required, but can damage the microphone.
What does the Scarlett 18i8 audio interface do?
The Scarlett 18i8 audio interface provides the means for connecting microphones, musical instruments, line level audio signals and digital audio signals in both ADAT and S/PDIF formats to a computer running compatible versions of Mac OS or Windows.
How does Focusrite control work on Scarlett 18i8?
All inputs on the Scarlett 18i8 are routed directly to your DAW software for recording, but Focusrite Control also allows you to route these signals internally within the device to the outputs so that you can monitor the audio signals with ultra-low latency – before they arrive at your DAW, should you need to do so.
Is there a second generation of Scarlett 18i8?
With the 2nd Generation Scarlett 18i8, Focusrite has been generous enough to jam pack this thing full of added features and bonuses that it’s guaranteed to get your home studio up and running fast!
Is the Scarlett 18i8 routed to the Daw?
Although all inputs and outputs on the Scarlett 18i8 are routed directly to and from your DAW for recording and playback, you can configure the routing within your DAW in order to meet your precise needs.