How does the dogtra remote work?
The Constant button is located on the bottom of the left side of the handheld transmitter. Pressing the Constant button gives continuous stimulation as long as the button is pressed, for up to 12 seconds. If the button is not released after 12 seconds, the stimulation will automatically turn off as a safety feature.
How do you know when dogtra collar is fully charged?
Transmitter Indicator Light (LED window) The LED glows green when the battery is fully charged and turns to amber when battery life is getting low. When the LED emits a blinking red light, the battery needs to be recharged.
How long do dogtra collars last?
The batteries in the units have an average standby life of 34-hours. With moderate nick, constant or pager use, battery life will decrease to approximately 20 hours.
What do the buttons on the E collar do?
1) Stimulation Button – (Black) It sends a stimulation to collar. 2) Stimulation Booster Button – (Red) It sends a boosted stimulation to collar (25 levels higher than current stim level). Depending on your dog, this might be used as the corrective level.
Why is my e collar not working?
Make sure your battery is charged in both the collar and the transmitter. Low battery charge can make for inconsistent functioning. Make sure both pieces are turned on and that the unit is properly synced so that the collar is receiving a signal from the transmitter.
How do I turn on my dogtra collar remote?
Turning the ARC On/Off To turn the transmitter on, hold down the button on the right side of the transmitter until the LCD screen illuminates. To turn the transmitter off, hold down the button on the right side of the transmitter until the LCD screen shuts off.
Why is my dogtra collar blinking orange?
The LED glows green when the battery is fully charged and turns to amber when battery life is getting low. When the LED emits a blinking red light, the battery needs to be recharged. The collar should be fitted so that the stainless steel contact points press firmly against the dog’s skin.
Can you overcharge an E-collar?
Einstein E-Collar™ Specifics: The battery charge circuitry used by E-Collar Technologies, Inc. is optimized for Lithium Polymer batteries, no risk of overcharge, no risk of degradation if charged before fully discharged.
How do you reset a dogtra collar?
Hold the two red dots together for about 5 seconds or more. Release them when the green LED blinks rapidly on the receiver/collar.
What is the red button on the E collar?
There are several parts of the e-collar: the red button is the continuous pressure, the black “nick” button above continuous is for quick bursts of stimulations , the dial turns up and down the amount of stimulation, and the T is the vibrate function.
What’s the proper rheostat dial for dogtra?
Proper e-collar use Rheostat dial allows for gradual increases in Dogtra e-collars are intended for the sole purpose stimulation intensity with no jumps between of behavior modification of dogs. They are not levels (0-127).
Is the dogtra training box made of polypropylene?
The Dogtra Training Box (3) is designed to fit the Dogtra BALL TRAINER. The Dogtra Training Box is specifically designed to fit the Dogtra BALL TRAINER. (3) Dogtra Training Boxes come in this set. Light weight and durable, the Dogtra Training Box is made out of fluted polypropylene sheets to provide the least distracting material odor.
Can a dogtra be used with an IQ mini?
Dogtra DUAL DIAL transmitter, compatible with the iQ PLUS/iQ MINI, 200C/202C, 280C/282C, ARC, and 1900S/1902S. The Dogtra DUAL DIAL transmitter is an advanced expandable handheld controller, compatible with the iQ PLUS/iQ MINI, 200C/202C, 280C/282C, ARC, and 1900S/1902S.
Where is the battery charger on a dogtra collar?
All Dogtra E-collars have non-exposed antennas To use the battery charger for the two-dog unit, that are located inside the collar/receiver. combine both sets of battery charging (splitter) cables as shown. TESTING TESTING TESTING YOUR 2. The indicator light (LED) on the collar receiver COLLARS will light briefly when the nick button is pressed.