How do I reset my KitchenAid refrigerator?

How do I reset my KitchenAid refrigerator?

Reset a KitchenAid Refrigerator According to KitchenAid, the filter status light can be reset by pressing the filter reset button on the display and holding it until the light turns off. This will reset the refrigerator’s system. You can also press the water filter button for three seconds.

What is PO code on KitchenAid refrigerator?

Power Outage: The Power Outage indicator lets you know if the power supply to the refrigerator has been off and the freezer temperature has risen to 18°F (-8°C) or higher. The control panel temperature display will read “PO,” and an alert tone will sound three times.

Why is my KitchenAid refrigerator not getting cold?

Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.

Who can fix a KitchenAid refrigerator?

Sears Home Services will repair your KitchenAid appliances no matter where you bought them! Whether it is your washer, dryer, refrigerator, dishwasher, range or oven, Sears Home Services will send qualified repair technicians to your home to repair and maintain your KitchenAid appliances.

Does refrigerator have a reset button?

Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.

How do I fix the Po on my Kitchenaid refrigerator?

If you still have the issue after replacing the Control Board, replacing the Power Supply Board may fix the problem. If you have to press the confirm button and then it works for 5 or 10 minutes, then if you hear a clicking sound (a relay click), the complete refrigerator may power off and then turn back on.

How do I program my Kitchenaid refrigerator?

Questions & Answers

1. Press and hold the WATER Keypad.
2. Press and hold LL Keypad.
3. Release the WATER Keypad and wait 3 seconds.
4. The control will display PE to indicate the programming mode.
5. Entry is confirmed by pressing the LL Keypad once more.
6. The control will display the current Program CODE.

What does PF mean on a KitchenAid refrigerator?

When you see the code PF on the display of your KitchenAid refrigerator, it means there has been a power failure. Clear the code by pressing the ‘Cancel’ key. Reconnect the refrigerator to an alternative power source so that it doesn’t defrost completely.

What does the Po code mean on a KitchenAid refrigerator?

The code means the release heater of the ice maker is being read as an open circuit. Check the wiring connections and reconnect any loose wire. Additionally, replace the wire harness if it is faulty. The PO error code in your KitchenAid refrigerator means that there is a power outage.

How to check for a KitchenAid fault code?

KitchenAid Fault Codes 1 Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC). 2 For SELF CLEAN models: check door lock operation. 3 Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit.

Why do I get an error code on my Refrigerator?

The error code means the defrost sensor of the freezer is faulty. Possibly, it is reading as shorted or open. It is important to check it to see if it is open or shorted. This error code means the defrost sensor of the refrigerator is faulty. Check the connections of the wires and reconnect the loose ones.